NOT ALL RJ-45S ARE CREATED EQUAL
FEATURING SENTINEL CONNECTOR SYSTEMS - WHEN SIGNAL INTEGRITY MATTERS
          Shipping Over 100,000,000 RJ45 Plugs a Year - MADE in USA

Cage Code 71SB6   DUNS 191497254    P:630-659-6337    dave@rj45s.com

             
111S08080095HA4 
RJ45 Plug for CommScope® Uniprise® Ultra 10® 10GNS4 ETL Verified Category 6A F/UTP Cables

    
 



   
CommScope® Uniprise® Ultra 10® 10GNS4 ETL Verified

Category 6A F/UTP Cable


8450704/10 - Uniprise® Ultra 10® 10GNS4 ETL Verified Category 6A F/UTP Cable, non-plenum, gray jacket, 4 pair count, 1000 ft (305 m) length reel

8450904/10 Uniprise® Ultra 10® 10GNS4 ETL Verified Category 6A F/UTP Cable, non-plenum, blue jacket, 4 pair count, 1000 ft (305 m) length reel

8451004/10 Uniprise® Ultra 10® 10GNS4 ETL Verified Category 6A F/UTP Cable, non-plenum, red jacket, 4 pair count, 1000 ft (305 m) length reel

84510004/30 Uniprise® Ultra 10® 10GNS4 ETL Verified Category 6A F/UTP Cable, non-plenum, red jacket, 4 pair count, 3000 ft (914 m) length reel

8455704/10 Uniprise® Ultra 10® 10GNS4 ETL Verified Category 6A F/UTP Cable, non-plenum, red jacket, 4 pair count, 1000 ft (305 m) length reel

884003404/10 Uniprise® Ultra 10® 10GNS4 ETL Verified Category 6A F/UTP Cable, non-plenum, green jacket, 4 pair count, 1000 ft (305 m) length reel

884003484/30 Uniprise® Ultra 10® 10GNS4 ETL Verified Category 6A F/UTP Cable, non-plenum, green jacket, 4 pair count, 3000 ft (914 m) length reel

884003504/10 Uniprise® Ultra 10® 10GNS4 ETL Verified Category 6A F/UTP Cable, non-plenum, yellow jacket, 4 pair count, 1000 ft (305 m) length reel

884003504/30 Uniprise® Ultra 10® 10GNS4 ETL Verified Category 6A F/UTP Cable, non-plenum, yellow jacket, 4 pair count, 3000 ft (914 m) length reel


111S08080095HA4

Drop Down Menu
1-24 - $2.25
25-49 - $2.15
50-99 - $2.03
100+ - $1.91
Volume Price - Request Quote


111S08080095HA4 Product Features

*   Shielded RJ45 plug with integral "C CRIMP" for added cable stress relief and additional strength. Accepts up to .037"-.042" Conductor OD's and up to a .310" cable jacket OD
*  
Incorporates a PATENTED CONDUCTIVE NEXT Reduction System. In addition to providing PRECISE CONDUCTOR ALIGNMENT, the Composite Carbon/Graphite Fiber Conductor Load Bar GREATLY REDUCES NEXT and RETURN LOSS by ABSORBING REFLECTIONS and CHANNELING IT AWAY FROM THE CONDUCTORS. Using recommended termination procedures and equipment, ANSI/TIA-568.2-D Category 6a performance levels are achievable with good workmanship and certified cables.
*   Three piece design provides proper conductor feedthrough and precise alignment to insure consistent terminations and electrical performance measurements.
*   The conductors are isolated by the Conductor Load Bars and through Plastic Isolation/Insulation Barriers at the front of the plug.
  Plug accepts both SOLID or STRANDED conductors
*   Made in USA

111S08080095HA4 Specifications 

Performance:    Meets or Exceeds ANSI/TIA 568.2-D - ANSI/TIA 1096 (Formerly FCC Part 68) - CENELEC EN 50173 -  
 IEC 60603 - ISO-8877 - ISO/IEC 11801

Contact Material:   Phosphor Bronze - .012" thick
Contact Plating:   Minimum 50 Micro-Inch Pure Gold - Selective 24 Carat Hard Gold Plate in contact area over 100 Micro-Inch minimum Nickel Plate. Exceeds TIA-1096 specifications (formerly FCC Part 68)
Plug Material:   Polycarbonate
Plug Tolerances and Dimensions:   Meets TIA-1096 specifications (formerly FCC Part 68)
UL Recognized:   UL File #E188111
Flame Autoextinguish:   94V-0
Operating Temperature:   -40º C to +85º C
Insertion/Extraction Life:   1000 Minimum Cycles
Contact Resistance:  10 Milli-Ohms maximum
Current/Voltage:   30 VAC/42 VDC at 1.5 Amps
Compliance:   RoHS Compliant


COMPLEMENTARY PRODUCTS TO "DO THE JOB RIGHT"




900020


Terminates Both
Contacts and "C" Crimp


TERMINATION TOOL

Professional Grade
Controlled Ratchet Style
Insures Proper Blade Setting Depth
1,000,000 Cycles Minimum

 
DO NOT TAKE THIS STEP FOR GRANTED
Cable assemblies built using inadequate or poor quality tools and dies.....worn out tooling.....or mismatched tooling, WILL HAVE A MAJOR IMPACT ON THE PERFORMANCE
OF THE CABLE ASSEMBLY.
           
       


900020




           


SNAGLESS STRAIN RELIEF BOOT OPTIONS


  8MM
SNAGLESS BOOT
Accepts up to 8MM Jacket OD (.314")

Care must be taken to fully wrap the C CRIMP around the Cable (360º) to insure proper fit.

 Color Options:
B0041 (Gray) - B0042 (Blue) - B0043 (White)
B0044 (Yellow) - B0046 (Red) - B0047 (Orange)
B0048 (Purple) - B0049 (Green) - B0051 (Black)
 B0052 (Clear)


8MM Boots
 


EPS-300



3M™ HEAT SHRINK TUBING


1/2 Inch Diameter
Adhesive-Lined, 3:1, Flexible, Polyolefin

"Lock" Everything in Place
Sold in 1 1/2 Inch Lengths

 
3M EPS-300 Heat Shrink




                     The RJ-45 Is A Highly Engineered Interconnection System

CAVEAT EMPTOR.....Let The Buyer Beware

SUB-STANDARD, NON-COMPLIANT and COUNTERFEIT RJ45's coming in from the Far East

KNOW THE STANDARDS - KNOW THE SPECS - INSIST ON COMPLIANCE - KNOW YOUR SUPPLIERS


For more information, contact
dave@rj45s.com

RJ45s.com
2400 East Main Street
St Charles, IL 60174
phone: 630-659-6337


 
                                                                                                                       




Website Builder