NOT ALL RJ-45S ARE CREATED EQUAL
FEATURING SENTINEL CONNECTOR SYSTEMS - WHEN SIGNAL INTEGRITY MATTERS
          Shipping Over 100,000,000 RJ45 Plugs a Year - MADE in USA

Cage Code 71SB6   DUNS 191497254    P:630-659-6337    dave@rj45s.com

             
111S08080090H34 
RJ45 Plug for CommScope® Uniprise® Media 6® 65NS4+ Category 6 F/UTP Cables

   

                    

CommScope® Uniprise® Media 6® 65NS4+ Category 6 F/UTP Cables


8442904/10
- Media 6® 65NS4+ Category 6 F/UTP Cable, non-plenum, green jacket, 4 pair count, 1000 ft (305 m) length, reel

8447404/10 - Media 6® 65NS4+ Category 6 F/UTP Cable, non-plenum, black jacket, 4 pair count, 1000 ft (305 m) length, reel

8852604/10 - Media 6® 65NS4+ Category 6 F/UTP Cable, non-plenum, grey jacket, 4 pair count, 1000 ft (305 m) length, reel

8852684/30 - Media 6® 65NS4+ Category 6 F/UTP Cable, non-plenum, grey jacket, 4 pair count, 3000 ft (305 m) length, reel

8859104/10 - Media 6® 65NS4+ Category 6 F/UTP Cable, non-plenum, blue jacket, 4 pair count, 1000 ft (305 m) length, reel

8859204/10 - Media 6® 65NS4+ Category 6 F/UTP Cable, non-plenum, yellow jacket, 4 pair count, 1000 ft (305 m) length, reel

8859304/10 - Media 6® 65NS4+ Category 6 F/UTP Cable, non-plenum, red jacket, 4 pair count, 1000 ft (305 m) length, reel

8866604/10 - Media 6® 65NS4+ Category 6 F/UTP Cable, non-plenum, white jacket, 4 pair count, 1000 ft (305 m) length, reel


88670004/10 - Media 6® 65NS4+ Category 6 F/UTP Cable, non-plenum, orange jacket, 4 pair count, 1000 ft (305 m) length, reel



111S08080090H34

Drop Down Menu
1-24 - $2.09
25-49 - $1.99
50-99 - $1.89
100+ - $1.79
Volume Price - Request Quote





111S08080090H34 Product Features

*   Shielded RJ45 plug with integral "C CRIMP" for increased shield effectiveness, added cable stress relief and additional strength. Accepts up to a .310" cable jacket OD
*  
Incorporates a PATENTED CONDUCTIVE NEXT Reduction System. In addition to providing PRECISE CONDUCTOR ALIGNMENT, the Composite Carbon/Graphite Fiber Conductor Load Bar GREATLY REDUCES NEXT and RETURN LOSS by ABSORBING REFLECTIONS and CHANNELING IT AWAY FROM THE CONDUCTORS. Using recommended termination procedures and equipment, ANSI/TIA-568.2-D Category 6 performance levels are achievable with good workmanship and certified cables.
*   Utilizes a 4 over 4 contact design (4 LONG and 4 SHORT) that provides increased isolation and spatial dispersion within the plug to minimize crosstalk and accepts .044" - 048" CONDUCTOR OD. 
*   The conductors are isolated by the Conductor Load Bar and through Plastic Isolation/Insulation Barriers where contact termination is made, thereby improving electrical performance.
  Plug accepts both SOLID or STRANDED conductors
*   Made in USA

111S08080090H34 Specifications 

Performance:    Meets or Exceeds ANSI/TIA-568.2-D - ANSI/TIA 1096 (Formerly FCC Part 68) - CENELEC EN 50173 -    
IEC 60603 - ISO-8877 - ISO/IEC 11801
Contact Material:   Phosphor Bronze - .012" thick
Contact Plating:   Minimum 50 Micro-Inch Pure Gold - Selective 24 Carat Hard Gold Plate in contact area over 100 Micro-Inch minimum Nickel Plate. Exceeds TIA-1096 specifications (formerly FCC Part 68)
Plug Material:   Polycarbonate
Plug Tolerances and Dimensions:   Meets TIA-1096 specifications (formerly FCC Part 68)
UL Recognized:   UL File #E188111
Flame Autoextinguish:   94V-0
Operating Temperature:   -40º C to +85º C
Insertion/Extraction Life:   1000 Minimum Cycles
Contact Resistance:  10 Milli-Ohms maximum
Current/Voltage:   30 VAC/42 VDC at 1.5 Amps
Compliance:   RoHS Compliant



COMPLEMENTARY PRODUCTS TO "DO THE JOB RIGHT"




900020


Terminates Both
Contacts and "C" Crimp


TERMINATION TOOL

Professional Grade
Controlled Ratchet Style
Insures Proper Blade Setting Depth
1,000,000 Cycles Minimum

 
DO NOT TAKE THIS STEP FOR GRANTED

Cable assemblies built using inadequate or poor quality tools and dies.....worn out tooling.....or mismatched tooling, WILL HAVE A MAJOR IMPACT ON THE PERFORMANCE
OF THE CABLE ASSEMBLY.

   111S08080090H34 Termination Instructions




900020



3M™ 1181


 

PROPER CABLE PREPARATION INCLUDES COPPER SHIELDING TAPE TO MAINTAIN SHIELD INTEGRITY & PROVIDING A PLACE FOR THE "C CRIMP" SHIELD ON THE CABLE

3M™
 1181
1/2" Copper Foil Shielding Tape
with Conductive Adhesive




 
3M 1181 Copper Foil Shielding Tape





           

SNAGLESS STRAIN RELIEF BOOT OPTIONS



  8MM
SNAGLESS BOOT
Accepts up to 8MM Jacket OD (.314")

Care must be taken to fully wrap the C CRIMP around the Cable (360º) to insure proper fit.

Color Options:
B0041 (Gray) - B0042 (Blue) - B0043 (White)
B0044 (Yellow) - B0046 (Red) - B0047 (Orange)
B0048 (Purple) - B0049 (Green) - B0051 (Black)
B0052 (Clear)

8MM Boots
 


EPS-300



3M™ HEAT SHRINK TUBING


1/2 Inch Diameter
Adhesive-Lined, 3:1, Flexible, Polyolefin

"Lock" Everything in Place
Sold in 1 1/2 Inch Lengths

 
3M EPS-300 Heat Shrink


The RJ-45 Is A Highly Engineered Interconnection System

CAVEAT EMPTOR.....Let The Buyer Beware

SUB-STANDARD, NON-COMPLIANT and COUNTERFEIT RJ45's coming in from the Far East

KNOW THE STANDARDS - KNOW THE SPECS - INSIST ON COMPLIANCE - KNOW YOUR SUPPLIERS


For more information, contact
dave@rj45s.com

RJ45s.com
2400 East Main Street
St Charles, IL 60174
phone: 630-659-6337


 
                                                                                                                       






Website Builder