NOT ALL RJ-45S ARE CREATED EQUAL
FEATURING SENTINEL CONNECTOR SYSTEMS - WHEN SIGNAL INTEGRITY MATTERS
          Shipping Over 100,000,000 RJ45 Plugs a Year - MADE in USA

Cage Code 71SB6   DUNS 191497254    P:630-659-6337    dave@rj45s.com

             
111S08080095HA4
 
RJ45 Plug for Belden 10GX32 IBDN Category 6A U/UTP CMR Cables

    




BELDEN® IBDN 10GX32 Enhanced
Category 6A Bonded-Pair UTP CMR Cable


CAT6A (625MHz), 4-Bonded-Pair, U/UTP-Unshielded, Riser-CMR, Premise Horizontal Cable, 23 AWG Solid Bare Copper Conductors, Polyolefin Insulation, Patented Double-H spline, Ripcord, PVC Jacket

Includes Part Numbers:
10GX32 0041000     YELLOW 1K Reel
10GX32 0061000     BLUE, LIGHT 1K Reel
10GX32 0081000     GRAY 1K Reel
10GX32 0091000     WHITE 1K Reel
10GX32 0101000     BLACK 1K Reel



111S08080095HA4

Drop Down Menu
1-24 - $2.25
25-49 - $2.15
50-99 - $2.03
100+ - $1.91

Volume Price - Request Quote



DUE TO THE LARGE CABLE OD AND CONSTRUCTION SENTINEL RECOMMENDS A SHIELDED PLUG WITH THE C CRIMP ATTACHED TO THE OUTER JACKET


111S08080095HA4 Product Features

*   Shielded RJ45 plug with integral "C CRIMP" for added cable stress relief and additional strength. Accepts up to .037"-.042" Conductor OD's and up to a .310" cable jacket OD
*  
Incorporates a PATENTED CONDUCTIVE NEXT Reduction System. In addition to providing PRECISE CONDUCTOR ALIGNMENT, the Composite Carbon/Graphite Fiber Conductor Load Bar GREATLY REDUCES NEXT and RETURN LOSS by ABSORBING REFLECTIONS and CHANNELING IT AWAY FROM THE CONDUCTORS. Using recommended termination procedures and equipment, ANSI/TIA-568.2-DCategory 6A performance levels are achievable with good workmanship and certified cables.
*   Three piece design provides proper conductor feedthrough and precise alignment to insure consistent terminations and electrical performance measurements.
*   The conductors are isolated by the Conductor Load Bars and through Plastic Isolation/Insulation Barriers at the front of the plug.
  Plug accepts both SOLID or STRANDED conductors

*   Made in USA

111S08080095HA4 Specifications 

Performance:    Meets or Exceeds ANSI/TIA-568.2-D - ANSI/TIA 1096-B (Formerly FCC Part 68) - CENELEC EN 50173 -  
 IEC 60603 - ISO-8877 - ISO/IEC 11801

Contact Material:   Phosphor Bronze - .012" thick
Contact Plating:   Minimum 50 Micro-Inch Pure Gold - Selective 24 Carat Hard Gold Plate in contact area over 100 Micro-Inch minimum Nickel Plate. Exceeds TIA-1096 specifications (formerly FCC Part 68)
Plug Material:   Polycarbonate
Plug Tolerances and Dimensions:   Meets TIA-1096 specifications (formerly FCC Part 68)
UL Recognized:   UL File #E188111
Flame Autoextinguish:   94V-0
Operating Temperature:   -40º C to +85º C
Insertion/Extraction Life:   1000 Minimum Cycles
Contact Resistance:  10 Milli-Ohms maximum
Current/Voltage:   30 VAC/42 VDC at 1.5 Amps
Compliance:   RoHS Compliant


COMPLEMENTARY PRODUCTS TO "DO THE JOB RIGHT"




900020


Terminates Both
Contacts and "C" Crimp


TERMINATION TOOL

Professional Grade
Controlled Ratchet Style
Insures Proper Blade Setting Depth
1,000,000 Cycles Minimum

 
DO NOT TAKE THIS STEP FOR GRANTED

Cable assemblies built using inadequate or poor quality tools and dies.....worn out tooling.....or mismatched tooling, WILL HAVE A MAJOR IMPACT ON THE PERFORMANCE
OF THE CABLE ASSEMBLY.
           
       


900020




           

SNAGLESS STRAIN RELIEF BOOT OPTIONS

8MM SNAGLESS BOOT
Accepts up to 8MM Jacket OD (.314")
 
Care must be taken to fully wrap the C CRIMP around the Cable (360º) to insure proper fit.

Color Options:
B0041 (Gray) - B0042 (Blue) - B0043 (White)
B0044 (Yellow) - B0046 (Red) - B0047 (Orange)
B0048 (Purple) - B0049 (Green) - B0051 (Black) - B0052 (Clear)



8MM Boots
 


EPS-300



3M™ HEAT SHRINK TUBING


1/2 Inch Diameter
Adhesive-Lined, 3:1, Flexible, Polyolefin

"Lock" Everything in Place
Sold in 1 1/2 Inch Lengths

 
3M EPS-300 Heat Shrink



The RJ-45 Is A Highly Engineered Interconnection System

CAVEAT EMPTOR.....Let The Buyer Beware

SUB-STANDARD, NON-COMPLIANT and COUNTERFEIT RJ45's coming in from the Far East

KNOW THE STANDARDS - KNOW THE SPECS - INSIST ON COMPLIANCE - KNOW YOUR SUPPLIERS


For more information, contact
dave@rj45s.com

RJ45s.com
2400 East Main Street
St Charles, IL 60174
phone: 630-659-6337



 
                                                                                                                       



Website Builder