*   Shielded RJ45 plug with integral "C CRIMP" for added cable stress relief and additional strength. Accepts up to .037"-.042" Conductor OD's and up to a .310" cable jacket OD
*   Incorporates a PATENTED CONDUCTIVE NEXT Reduction System. In addition to providing PRECISE CONDUCTOR ALIGNMENT, the Composite Carbon/Graphite Fiber Conductor Load Bar GREATLY REDUCES NEXT and RETURN LOSS by ABSORBING REFLECTIONS and CHANNELING IT AWAY FROM THE CONDUCTORS. Using recommended termination procedures and equipment, ANSI/TIA-568.2-DCategory 6A performance levels are achievable with good workmanship and certified cables.
*   Three piece design provides proper conductor feedthrough and precise alignment to insure consistent terminations and electrical performance measurements.
*   The conductors are isolated by the Conductor Load Bars and through Plastic Isolation/Insulation Barriers at the front of the plug.
*   Plug accepts both SOLID or STRANDED conductors
*   Made in USA

111S08080095HA4 Specifications 

Performance:    Meets or Exceeds ANSI/TIA-568.2-D - TIA 1096 (Formerly FCC Part 68) - CENELEC EN 50173 -    
IEC 60603 - ISO-8877 - ISO/IEC 11801
Contact Material:   Phosphor Bronze - .012" thick
Contact Plating:   Minimum 50 Micro-Inch Pure Gold - Selective 24 Carat Hard Gold Plate in contact area over 100 Micro-Inch minimum Nickel Plate. Exceeds TIA-1096 specifications (formerly FCC Part 68)
Plug Material:   Polycarbonate
Plug Tolerances and Dimensions:   Meets TIA-1096 specifications (formerly FCC Part 68)
UL Recognized:   UL File #E188111 - UL 1863 (1000v)
Flame Autoextinguish:   94V-0
Operating Temperature:   -40º C to +85º C
Insertion/Extraction Life:   1000 Minimum Cycles
Contact Resistance:  10 Milli-Ohms maximum
Current/Voltage:   30 VAC/57 VDC at 1.5 Amps
Compliance:   RoHS Compliant
PoE:   Meets requirements of 15W PoE (IEEE 802.3af), 30W PoE+ (IEEE 802.3at), 60W PoE++ (IEEE 802.3bt Type 3) and 100W PoE++ (IEEE 802.3bt Type 4)

COMPLEMENTARY PRODUCTS TO "DO THE JOB RIGHT"
900020  Terminates Both Contacts and "C" Crimp	TERMINATION TOOL Professional Grade Controlled Ratchet Style Insures Proper Blade Setting Depth 1,000,000 Cycles Minimum   DO NOT TAKE THIS STEP FOR GRANTED Cable assemblies built using inadequate or poor quality tools and dies.....worn out tooling.....or mismatched tooling, WILL HAVE A MAJOR IMPACT ON THE PERFORMANCE OF THE CABLE ASSEMBLY.	900020 Price Per Unit $389.99 USD
	SNAGLESS STRAIN RELIEF BOOT OPTIONS 8MM SNAGLESS BOOT Accepts up to 8MM Jacket OD (.314")   Care must be taken to fully wrap the C CRIMP around the Cable (360º) to insure proper fit. Color Options: B0041 (Gray) - B0042 (Blue) - B0043 (White) B0044 (Yellow) - B0046 (Red) - B0047 (Orange) B0048 (Purple) - B0049 (Green) - B0051 (Black) - B0052 (Clear)	8MM Boots
3M™ EPS-300	3M™ HEAT SHRINK TUBING 1/2 Inch Diameter Adhesive-Lined, 3:1, Flexible, Polyolefin "Lock" Everything in Place Sold in 1 1/2 Inch Lengths	3M EPS-300 Heat Shrink Price Per Piece $0.35 USD

CAVEAT EMPTOR.....Let The Buyer Beware

SUB-STANDARD, NON-COMPLIANT and COUNTERFEIT RJ45's coming in from the Far East