NOT ALL RJ-45S ARE CREATED EQUAL
FEATURING SENTINEL CONNECTOR SYSTEMS - WHEN SIGNAL INTEGRITY MATTERS
          Shipping Over 100,000,000 RJ45 Plugs a Year - MADE in USA

Cage Code 71SB6   DUNS 191497254    P:630-659-6337    dave@rj45s.com

             
111S08080090H34
RJ45 Plug for Belden 10GXS33 Category 6A Plenum Cables

     



BELDEN® 10GXS33 Enhanced
Category 6A Bonded-Pair CMP Cable


Category 6A Enhanced (625MHz), 4-Bonded-Pair, Plenum-CMP, Premise Horizontal Cable, 23 AWG Solid Bare Copper Conductors, FEP Insulation, Patented EquiSpline™ & EquiBlock™ Technologies, Ripcord, Flamarrest® Jacket

Includes Part Numbers:
10GXS33 D151000    BLUE 1K Reel
10GXS33 0021000    RED 1K Reel

10GXS33 0031000    ORANGE 1K Reel
10GXS33 0041000    YELLOW 1K Reel
10GXS33 0051000    GREEN, DARK 1K Reel
10GXS33 0071000    VIOLET 1K Reel
10GXS33 0081000    GRAY 1K Reel
10GXS33 0091000    WHITE 1K Reel
10GXS33 0101000    BLACK 1K Reel
10GXS33D15A1000    BLUE 1K RIB
10GXS33002A1000    RED 1K RIB
10GXS33003A1000    ORANGE 1K RIB
10GXS33004A1000    YELLOW 1K RIB
10GXS33005A1000    GREEN, DARK 1K RIB
10GXS33007A1000    VIOLET 1K RIB
10GXS33008A1000    GRAY 1K RIB
10GXS33009A1000    WHITE 1K RIB
10GXS33010A1000    BLACK 1K RIB


111S08080090H34

Drop Down Menu
1-24 - $2.09
25-49 - $1.99
50-99 - $1.89
100-999 - $1.79
Volume Price - Request Quote



111S08080090H34 Product Features

*   Shielded RJ45 plug with integral "C CRIMP" for added cable stress relief and additional strength. Accepts up to .044"-.048" Conductor OD's and up to a .310" cable jacket OD
*  
Incorporates a PATENTED CONDUCTIVE NEXT Reduction System. In addition to providing PRECISE CONDUCTOR ALIGNMENT, the Composite Carbon/Graphite Fiber Conductor Load Bar GREATLY REDUCES NEXT and RETURN LOSS by ABSORBING REFLECTIONS and CHANNELING IT AWAY FROM THE CONDUCTORS. Using recommended termination procedures and equipment, ANSI/TIA-568.2-D Category 6A performance levels are achievable with good workmanship and certified cables.
*   Two piece design provides proper conductor feedthrough and precise alignment to insure consistent terminations and electrical performance measurements.
*   The conductors are isolated by the Conductor Load Bars and through Plastic Isolation/Insulation Barriers at the front of the plug.
  Plug accepts both SOLID or STRANDED conductors

*   Made in USA

111S08080090H34 Specifications 

Performance:    Meets or Exceeds ANSI/TIA-568.2-D - ANSI/TIA 1096 (Formerly FCC Part 68) - CENELEC EN 50173 -  
 IEC 60603 - ISO-8877 - ISO/IEC 11801

Contact Material:   Phosphor Bronze - .012" thick
Contact Plating:   Minimum 50 Micro-Inch Pure Gold - Selective 24 Carat Hard Gold Plate in contact area over 100 Micro-Inch minimum Nickel Plate. Exceeds TIA-1096 specifications (formerly FCC Part 68)
Plug Material:   Polycarbonate
Plug Tolerances and Dimensions:   Meets TIA-1096 specifications (formerly FCC Part 68)
UL Recognized:   UL File #E188111
Flame Autoextinguish:   94V-0
Operating Temperature:   -40º C to +85º C
Insertion/Extraction Life:   1000 Minimum Cycles
Contact Resistance:  10 Milli-Ohms maximum
Current/Voltage:   30 VAC/42 VDC at 1.5 Amps
Compliance:   RoHS Compliant


COMPLEMENTARY PRODUCTS TO "DO THE JOB RIGHT"




900020


Terminates Both
Contacts and "C" Crimp


TERMINATION TOOL

Professional Grade
Controlled Ratchet Style
Insures Proper Blade Setting Depth
1,000,000 Cycles Minimum

 
DO NOT TAKE THIS STEP FOR GRANTED

Cable assemblies built using inadequate or poor quality tools and dies.....worn out tooling.....or mismatched tooling, WILL HAVE A MAJOR IMPACT ON THE PERFORMANCE
OF THE CABLE ASSEMBLY.
           
       


900020
 


3M™ 1181

 
 

PROPER CABLE PREPARATION INCLUDES COPPER SHIELDING TAPE TO MAINTAIN SHIELD INTEGRITY & PROVIDING A PLACE FOR THE "C CRIMP" SHIELD ON THE CABLE

3M™
1181
1/2" Copper Foil Shielding Tape
with Conductive Adhesive




 
3M 1181 Copper Foil Shielding Tape





           


SNAGLESS STRAIN RELIEF BOOT OPTIONS


  8MM
SNAGLESS BOOT
Accepts up to 8MM Jacket OD (.314")

Care must be taken to fully wrap the C CRIMP around the Cable (360º) to insure proper fit.

Color Options:
B0041 (Gray) - B0042 (Blue) - B0043 (White)
B0044 (Yellow) - B0046 (Red) - B0047 (Orange)
B0048 (Purple) - B0049 (Green) - B0051 (Black) - B0052 (Clear)


8MM Boots
 


EPS-300



3M™ HEAT SHRINK TUBING


1/2 Inch Diameter
Adhesive-Lined, 3:1, Flexible, Polyolefin

"Lock" Everything in Place
Sold in 1 1/2 Inch Lengths

 
3M EPS-300 Heat Shrink


The RJ-45 Is A Highly Engineered Interconnection System

CAVEAT EMPTOR.....Let The Buyer Beware

SUB-STANDARD, NON-COMPLIANT and COUNTERFEIT RJ45's coming in from the Far East

KNOW THE STANDARDS - KNOW THE SPECS - INSIST ON COMPLIANCE - KNOW YOUR SUPPLIERS


For more information, contact
dave@rj45s.com

RJ45s.com
2400 East Main Street
St Charles, IL 60174
phone: 630-659-6337


 
                                                                                                                       



Website Builder