Shipping Over 100,000,000 RJ45 Plugs a Year - MADE in USA
Cage Code 71SB6 DUNS 191497254 P:630-659-6337 dave@rj45s.com
Enhanced Category 5e
Shielded Non-Bonded Cables
1212F (CMR) - CAT5e+ (350MHz), 4-Pair, F/UTP-Foil shielded, Riser-CMR, Premise Horizontal Cable, 24 AWG solid bare copper conductors, polyolefin insulation, overall Beldfoil® shield, PVC jacket, RJ-45 compatible.
Includes Part Numbers:
1212F 002A1000 RED 1K RIB
1212F 0021000 RED 1K Reel
1212F 003A1000 ORANGE 1K RIB
1212F 0031000 ORANGE 1K Reel
1212F 004A1000 YELLOW 1K RIB
1212F 0041000 YELLOW 1K Reel
1212F 005A1000 GREEN, DARK 1K RIB
1212F 0051000 GREEN, DARK 1K Reel
1212F 006A1000 BLUE, LIGHT 1K RIB
1212F 006A500 BLUE, LIGHT 500 FT RIB
1212F 0061000 BLUE, LIGHT 1K Reel
1212F 008A1000 GRAY 1K RIB
1212F 0081000 GRAY 1K Reel
1212F 009A1000 WHITE 1K RIB
1212F 009A500 WHITE 500 FT RIB
1212F 0091000 WHITE 1K Reel
1212F 010A1000 BLACK 1K RIB
1212F 0101000 BLACK 1K Reel
1213F (CMP) - CAT5e+ (350MHz), 4-Pair, F/UTP-Foil shielded, Plenum-CMP, Premise Horizontal Cable, 24 AWG solid bare copper conductors, FEP insulation, overall Beldfoil® shield, Flamarrest® jacket, RJ-45 compatible.
1213F D15A1000 BLUE 1K RIB
1213F D15A500 BLUE 500 FT RIB
1213F D151000 BLUE 1K Reel
1213F D15500 BLUE 500 FT Reel
1213F 002A1000 RED 1K RIB
1213F 0021000 RED 1K Reel
1213F 003A1000 ORANGE 1K RIB
1213F 0031000 ORANGE 1K Reel
1213F 004A1000 YELLOW 1K RIB
1213F 0041000 YELLOW 1K Reel
1213F 005A1000 GREEN, DARK 1K RIB
1213F 0051000 GREEN, DARK 1K Reel
1213F 008A1000 GRAY 1K RIB
1213F 0081000 GRAY 1K Reel
1213F 009A1000 WHITE 1K RIB
1213F 009A500 WHITE 500 FT RIB
1213F 0091000 WHITE 1K Reel
1213F 010A1000 BLACK 1K Reel
1213F 0101000 BLACK 1K RIB
1213F 010501 BLACK 500 FT Reel
* Incorporates a PATENTED CONDUCTIVE NEXT Reduction System. In addition to providing PRECISE CONDUCTOR ALIGNMENT, the Composite Carbon/Graphite Fiber Conductor Load Bar GREATLY REDUCES NEXT and RETURN LOSS by ABSORBING REFLECTIONS and CHANNELING IT AWAY FROM THE CONDUCTORS. Using recommended termination procedures and equipment, ANSI/TIA-568.2-D Category 5e performance levels are achievable with good workmanship and certified cables.
* Utilizes a 4 over 4 contact design (4 LONG and 4 SHORT) that provides increased isolation and spatial dispersion within the plug to minimize crosstalk and allow for up to a .042" MAXIMUM CONDUCTOR OD.
* The conductors are isolated by the Conductor Load Bar and through Plastic Isolation/Insulation Barriers where contact termination is made, thereby improving electrical performance.
* Plug accepts both SOLID or STRANDED conductors
* Made in USA
111S08080028L34 Specifications
Performance: Meets or Exceeds ANSI/TIA-568.2-D - ANSI/TIA 1096 (Formerly FCC Part 68) - CENELEC EN 50173 -
IEC 60603 - ISO-8877 - ISO/IEC 11801
Contact Material: Phosphor Bronze - .012" thick
Contact Plating: Minimum 50 Micro-Inch Pure Gold - Selective 24 Carat Hard Gold Plate in contact area over 100 Micro-Inch minimum Nickel Plate. Exceeds TIA-1096 specifications (formerly FCC Part 68)
Plug Material: Polycarbonate
Plug Tolerances and Dimensions: Meets TIA-1096 specifications (formerly FCC Part 68)
UL Recognized: UL File #E188111
Flame Autoextinguish: 94V-0
Operating Temperature: -40º C to +85º C
Insertion/Extraction Life: 1000 Minimum Cycles
Contact Resistance: 10 Milli-Ohms maximum
Current/Voltage: 30 VAC/42 VDC at 1.5 Amps
Compliance: RoHS Compliant
COMPLEMENTARY PRODUCTS TO "DO THE JOB RIGHT" |
||
 900005/900216  |
TERMINATION TOOL Professional Grade Controlled Ratchet Style Insures Proper Blade Setting Depth 1,000,000 Cycles Minimum DO NOT TAKE THIS STEP FOR GRANTED Cable assemblies built using inadequate or poor quality tools and dies.....worn out tooling.....or mismatched tooling, WILL HAVE A MAJOR IMPACT ON THE PERFORMANCE OF THE CABLE ASSEMBLY. 111S08080028L34 Termination Instructions  |
|
| SNAGLESS STRAIN RELIEF BOOTS FOR 1213F |
||
|
|
SNAGLESS STRAIN RELIEF BOOT OPTIONS |
6MM Boots |
SNAGLESS STRAIN RELIEF BOOTS FOR 1212F |
||
 B00046L |
CLEAR PLASTIC SLIM-LINE SNAGLESS BOOT Boot "Locks" into Plug - 360º Honeycomb Design Provides Bend Radius Strain Relief - Clear Plastic eliminates color "mismatch" between cable and boot.
Accepts up to 6.7MM Jacket OD (.264") |
|
 EPS-300 |
3M™ HEAT SHRINK TUBING 1/2 Inch Diameter Adhesive-Lined, 3:1, Flexible, Polyolefin "Lock" Everything in Place Sold in 1 1/2 Inch Lengths  |
|
The RJ-45 Is A Highly Engineered Interconnection System
CAVEAT EMPTOR.....Let The Buyer Beware
SUB-STANDARD, NON-COMPLIANT and COUNTERFEIT RJ45's coming in from the Far East
KNOW THE STANDARDS - KNOW THE SPECS - INSIST ON COMPLIANCE - KNOW YOUR SUPPLIERSdave@rj45s.com
RJ45s.com
2400 East Main Street
St Charles, IL 60174
phone: 630-659-6337
