NOT ALL RJ-45S ARE CREATED EQUAL
FEATURING SENTINEL CONNECTOR SYSTEMS - WHEN SIGNAL INTEGRITY MATTERS
          Shipping Over 100,000,000 RJ45 Plugs a Year - MADE in USA

Cage Code 71SB6   DUNS 191497254    P:630-659-6337    dave@rj45s.com

             
111S08080016-34
RJ45 Plug for Belden 1624P and 1624R Cables

  




     
BELDEN CATEGORY 5 ScTP
Nonbonded-Pair Cables


1624P (CMP) - 24 AWG SBC conductors, FEP Teflon® insulation, twisted pairs, overall Beldfoil® shield, 24 AWG (7x32) tinned copper drain wire, Flamarrest® jacket.

1624R (CMR) - 24 AWG SBC conductors, Polyolefin insulation, twisted pairs, Beldfoil® shield, drain wire, PVC jacket.



111S08080016-34

Drop Down Menu
1-24 - $1.34
25-49 - $1.18
50-99 - $1.04
100+ - $0.74
Volume Price - Request Quote



111S08080016-34 Product Features

*   Incorporates a PLASTIC wire management system to provide PRECISE CONDUCTOR ALIGNMENT.
*   Utilizes a 4 over 4 contact design (4 LONG and 4 SHORT) that provides increased isolation and spatial dispersion within the plug to minimize crosstalk and accepts .037" - 042" CONDUCTOR OD. 
*   The conductors are isolated by the Conductor Load Bar and through Plastic Isolation/Insulation Barriers where contact termination is made, thereby improving electrical performance.
  Plug accepts both SOLID or STRANDED conductors
*   Made in USA

111S08080016-34 Specifications 

Performance:    Meets or Exceeds ANSI/TIA-568.2-D - ANSI/TIA 1096 (Formerly FCC Part 68) - CENELEC EN 50173 -    
IEC 60603 - ISO-8877 - ISO/IEC 11801
Contact Material:   Phosphor Bronze - .012" thick
Contact Plating:   Minimum 50 Micro-Inch Pure Gold - Selective 24 Carat Hard Gold Plate in contact area over 100 Micro-Inch minimum Nickel Plate. Exceeds TIA-1096 specifications (formerly FCC Part 68)
Plug Material:   Polycarbonate
Plug Tolerances and Dimensions:   Meets TIA-1096 specifications (formerly FCC Part 68)
UL Recognized:   UL File #E188111
Flame Autoextinguish:   94V-0
Operating Temperature:   -40º C to +85º C
Insertion/Extraction Life:   1000 Minimum Cycles
Contact Resistance:  10 Milli-Ohms maximum
Current/Voltage:   30 VAC/42 VDC at 1.5 Amps
Compliance:   RoHS Compliant


COMPLEMENTARY PRODUCTS TO "DO THE JOB RIGHT"




900005/900216


TERMINATION TOOL

Professional Grade
Controlled Ratchet Style
Insures Proper Blade Setting Depth
1,000,000 Cycles Minimum

 
DO NOT TAKE THIS STEP FOR GRANTED

Cable assemblies built using inadequate or poor quality tools and dies.....worn out tooling.....or mismatched tooling, WILL HAVE A MAJOR IMPACT ON THE PERFORMANCE OF THE CABLE ASSEMBLY.


111S08080016-34 Termination Instructions  

            

900005/900216

 
SNAGLESS STRAIN RELIEF BOOTS
 
FOR 1624P

 




6MM Slim-Line Boot
           

                



        
                          
       6MM Boot
      





SNAGLESS STRAIN RELIEF BOOT OPTIONS

SLIM-LINE STRAIN RELIEF
SNAGLESS BOOTS

Color Options:
B0013 (Blue) - B0028 (Light Gray)
B0029 (Dark Gray) - B0030 (Yellow)
B0031 (Green) - B0032 (Black) - B0033 (Purple)
B0034 (White) - B0035 (Red) and B0040 (Orange)







RUBBER PULL OVER 
STRAIN RELIEF 
SNAGLESS BOOTS

Color Options:
B001 (light Gray) - B002 (Dark Gray)
B003 (Blue) - B004 (Yellow) - B005 (Green)
B006 (Black) - B007 (Purple) -B008 (White)
B009 (Red) - B0010 (Orange) and B0011 (Pink)


               




6MM Boots
 
SNAGLESS STRAIN RELIEF BOOTS
 
FOR 1624R

 
 

           

           
B00047L


 
  
  
CLEAR PLASTIC SLIM-LINE SNAGLESS BOOT
           
Boot "Locks" into Plug - 360º Honeycomb Design Provides Bend Radius Strain Relief - Clear Plastic eliminates color "mismatch" between cable and boot.

Accepts up to 6.7MM Jacket OD (.264")






B00047L
 


EPS-300



3M™ HEAT SHRINK TUBING


1/2 Inch Diameter
Adhesive-Lined, 3:1, Flexible, Polyolefin

"Lock" Everything in Place
Sold in 1 1/2 Inch Lengths

 
3M EPS-300 Heat Shrink




The RJ-45 Is A Highly Engineered Interconnection System

CAVEAT EMPTOR.....Let The Buyer Beware

SUB-STANDARD, NON-COMPLIANT and COUNTERFEIT RJ45's coming in from the Far East

KNOW THE STANDARDS - KNOW THE SPECS - INSIST ON COMPLIANCE - KNOW YOUR SUPPLIERS


For more information, contact
dave@rj45s.com

RJ45s.com
2400 East Main Street
St Charles, IL 60174
phone: 630-659-6337



                                                                                                 




Website Builder