NOT ALL RJ-45S ARE CREATED EQUAL
FEATURING SENTINEL CONNECTOR SYSTEMS - WHEN SIGNAL INTEGRITY MATTERS
          Shipping Over 100,000,000 RJ45 Plugs a Year - MADE in USA

Cage Code 71SB6   DUNS 191497254    P:630-659-6337    dave@rj45s.com
             
111-08080054L34
RJ45 Plug for Belden Category 6+ 1872A (CMR) and 11874A (CMP) Cables


   

 

         BELDEN® CATEGORY 6+ ENHANCED
                   BONDED-PAIR CABLES



1872A - CAT6+ (350MHz), 4-Bonded-Pairs, U/UTP-Unshielded, Riser-CMR, Premise Horizontal Cable, 23 AWG Solid Bare Copper Conductor, Polyolefin Insulation, Ripcord, PVC Jacket

Includes Part Numbers:
1872A F6HA1000     GRAY, DARK PEARL 1K RIB
1872A F6H1000     GRAY, DARK PEARL 1K Reel
1872A X6GA1000     GOLD X6G 1K RIB
1872A X6G1000     GOLD X6G 1K Reel
1872A 002A1000     RED 1K RIB
1872A 0021000     RED 1K Reel
1872A 003A1000     ORANGE 1K RIB
1872A 0031000     ORANGE 1K Reel
1872A 004A1000     YELLOW 1K RIB
1872A 0041000     YELLOW 1K Reel
1872A 005A1000     GREEN, DARK 1K RIB
1872A 0051000     GREEN, DARK 1K Reel
1872A 006A1000     BLUE, LIGHT 1K RIB
1872A 0061000     BLUE, LIGHT 1K Reel
1872A 007A1000     VIOLET 1K RIB
1872A 0071000     VIOLET 1K Reel
1872A 009A1000     WHITE 1K RIB
1872A 0091000     WHITE 1K Reel
1872A 0101000     BLACK 1K Reel

1874A - CAT6+ (350MHz), 4-Bonded-Pairs, U/UTP-Unshielded, Plenum-CMP, Premise Horizontal Cable, 23 AWG Solid Bare Copper Conductor, FEP Insulation, Ripcord, Flamarrest® Jacket

Includes Part Numbers:
1874A D15A1000    BLUE 1K RIB
1874A D151000    BLUE 1K Reel
1874A F6HA1000    GRAY, DARK PEARL 1K RIB
1874A F6H1000    GRAY, DARK PEARL 1K Reel
1874A 002A1000    RED 1K RIB
1874A 003A1000    ORANGE 1K RIB
1874A 004A1000    YELLOW 1K RIB
1874A 005A1000    GREEN, DARK 1K RIB
1874A 007A1000    VIOLET 1K RIB
1874A 0071000    VIOLET 1K Reel
1874A 009A1000    WHITE 1K RIB
1874A 0091000    WHITE 1K Reel
1874A 0101000    BLACK 1K Reel
1874A 877A1000    NATURAL 1K RIB
1874A 8771000    NATURAL1K Reel



111-08080054L34

Stocked
111-08080054L34 Product Features

*   Incorporates a PATENTED CONDUCTIVE NEXT Reduction System. In addition to providing PRECISE CONDUCTOR ALIGNMENT, the Composite Carbon/Graphite Fiber Conductor Load Bar GREATLY REDUCES NEXT and RETURN LOSS by ABSORBING REFLECTIONS and CHANNELING IT AWAY FROM THE CONDUCTORS. Using recommended termination procedures and equipment, ANSI/TIA/EIA 568 Category 6 performance levels are achievable with good workmanship and certified cables.
*   Utilizes a 4 over 4 contact design (4 LONG and 4 SHORT) that provides increased isolation and spatial dispersion within the plug to minimize crosstalk and allow for up to a .042" MAXIMUM CONDUCTOR OD. 
*   The conductors are isolated by the Conductor Load Bar and through Plastic Isolation/Insulation Barriers where contact termination is made, thereby improving electrical performance.
  Plug accepts both SOLID or STRANDED conductors
*   Made in USA

111-08080054L34 Specifications 

Performance:    Meets or Exceeds ANSI/TIA 568-C.2 - ANSI/TIA 1096-B (Formerly FCC Part 68) - CENELEC EN 50173 -    
IEC 60603 - ISO-8877 - ISO/IEC 11801
Contact Material:   Phosphor Bronze - .012" thick
Contact Plating:   Minimum 50 Micro-Inch Pure Gold - Selective 24 Carat Hard Gold Plate in contact area over 100 Micro-Inch minimum Nickel Plate. Exceeds TIA-1096 specifications (formerly FCC Part 68)
Plug Material:   Polycarbonate
Plug Tolerances and Dimensions:   Meets TIA-1096 specifications (formerly FCC Part 68)
UL Recognized:   UL File #E188111
Flame Autoextinguish:   94-V0
Operating Temperature:   -40º C to +85º C
Insertion/Extraction Life:   1000 Minimum Cycles
Contact Resistance:  10 Milli-Ohms maximum
Current/Voltage:   30 VAC/42 VDC at 1.5 Amps
Compliance:   RoHS Compliant

COMPLEMENTARY PRODUCTS TO DO THE JOB RIGHT



900005
(with factory installed die set 900216)


TERMINATION TOOL

Professional Grade - Controlled Ratchet Style
Insures Proper Blade Setting Depth
1,000,000 Cycles Minimum

 
DO NOT TAKE THIS STEP FOR GRANTED
Cable assemblies built using inadequate or poor quality tools and dies.....worn out tooling.....or mismatched tooling, WILL HAVE A MAJOR IMPACT ON THE PERFORMANCE
OF THE CABLE ASSEMBLY.

              
111-08080054L34 Termination Instructions  


900005


 


EPS-300


3M™ HEAT SHRINK TUBING


1/2 Inch Diameter
Adhesive-Lined, 3:1, Flexible, Polyolefin

"Lock" Everything in Place
Sold in 3 Inch Lengths

 

EPS-300 Heat Shrink


  

The RJ-45 Is A Highly Engineered Interconnection System

CAVEAT EMPTOR.....Let The Buyer Beware

SUB-STANDARD, NON-COMPLIANT and COUNTERFEIT RJ45's coming in from the Far East

KNOW THE STANDARDS - KNOW THE SPECS - INSIST ON COMPLIANCE - KNOW YOUR SUPPLIERS


For more information, contact
dave@rj45s.com

RJ45s.com
2400 East Main Street
St Charles, IL 60174
phone: 630-659-6337
fax: 888-210-4593


 
                                                                                                                       


Website Builder