NOT ALL RJ-45S ARE CREATED EQUAL
FEATURING SENTINEL CONNECTOR SYSTEMS - WHEN SIGNAL INTEGRITY MATTERS
          Shipping Over 100,000,000 RJ45 Plugs a Year - MADE in USA

Cage Code 71SB6   DUNS 191497254    P:630-659-6337    dave@rj45s.com

             
111-08080090L34
RJ45 Plug for Belden Category 6 7940A CMR Cable




     
BELDEN® Industrial Category 6 CMR Cable

Premise Horizontal Cable, Gigabit Ethernet, 100BaseTX, 100BaseVG ANYLAN, 155 ATM, 622 ATM, 250MHz Category 6

7940A - 23 AWG Solid Bare Copper Conductors, Bonded Pair Polyolefin Insulation, Tape Separator, Ripcord, DATATUFF® PVC Jacket.



111-08080090L34

Drop Down Menu
1-24 - $2.45
25-49 - $2.09
50-99 - $1.99
100+ - $1.72

Volume Price - Request Quote


111-08080090L34 Product Features

*   Incorporates a PATENTED CONDUCTIVE NEXT Reduction System. In addition to providing PRECISE CONDUCTOR ALIGNMENT, the Composite Carbon/Graphite Fiber Conductor Load Bar GREATLY REDUCES NEXT and RETURN LOSS by ABSORBING REFLECTIONS and CHANNELING IT AWAY FROM THE CONDUCTORS. Using recommended termination procedures and equipment, ANSI/TIA/EIA 568 Category 6 performance levels are achievable with good workmanship and certified cables.
*   Utilizes a 4 over 4 contact design (4 LONG and 4 SHORT) that provides increased isolation and spatial dispersion within the plug to minimize crosstalk and accepts .044" - 048" CONDUCTOR OD.
*   The conductors are isolated by the Conductor Load Bar and through Plastic Isolation/Insulation Barriers where contact termination is made, thereby improving electrical performance.
  Plug accepts both SOLID or STRANDED conductors
*   Made in USA

111-08080090L34 Specifications
 

Performance:    Meets or Exceeds ANSI/TIA-568.2-D - ANSI/TIA 1096 (Formerly FCC Part 68) - CENELEC EN 50173 -    
IEC 60603 - ISO-8877 - ISO/IEC 11801
Contact Material:   Phosphor Bronze - .012" thick
Contact Plating:   Minimum 50 Micro-Inch Pure Gold - Selective 24 Carat Hard Gold Plate in contact area over 100 Micro-Inch minimum Nickel Plate. Exceeds TIA-1096 specifications (formerly FCC Part 68)
Plug Material:   Polycarbonate
Plug Tolerances and Dimensions:   Meets TIA-1096 specifications (formerly FCC Part 68)
UL Recognized:   UL File #E188111
Flame Autoextinguish:   94V-0
Operating Temperature:   -40º C to +85º C
Insertion/Extraction Life:   1000 Minimum Cycles
Contact Resistance:  10 Milli-Ohms maximum
Current/Voltage:   30 VAC/42 VDC at 1.5 Amps
Compliance:   RoHS Compliant


COMPLEMENTARY PRODUCTS TO "DO THE JOB RIGHT"




900005/900216


 

TERMINATION TOOL

Professional Grade
Controlled Ratchet Style
Insures Proper Blade Setting Depth
1,000,000 Cycles Minimum

 
DO NOT TAKE THIS STEP FOR GRANTED

Cable assemblies built using inadequate or poor quality tools and dies.....worn out tooling.....or mismatched tooling, WILL HAVE A MAJOR IMPACT ON THE PERFORMANCE
OF THE CABLE ASSEMBLY.

111-08080090L34 Termination Instructions  

(Same as 111-08080054L34)


900005/900216




 B00046L


 


  
CLEAR PLASTIC SLIM-LINE SNAGLESS BOOT

Boot "Locks" into Plug - 360º Honeycomb Design Provides Bend Radius Strain Relief - Clear Plastic eliminates color "mismatch" between cable and boot.





B00046L

 


EPS-300



3M™ HEAT SHRINK TUBING


1/2 Inch Diameter
Adhesive-Lined, 3:1, Flexible, Polyolefin

"Lock" Everything in Place
Sold in 1 1/2 Inch Lengths

 
3M EPS-300 Heat Shrink



The RJ-45 Is A Highly Engineered Interconnection System

CAVEAT EMPTOR.....Let The Buyer Beware

SUB-STANDARD, NON-COMPLIANT and COUNTERFEIT RJ45's coming in from the Far East

KNOW THE STANDARDS - KNOW THE SPECS - INSIST ON COMPLIANCE - KNOW YOUR SUPPLIERS


For more information, contact
dave@rj45s.com

RJ45s.com
2400 East Main Street
St Charles, IL 60174
phone: 630-659-6337



                                                                                                                        



Website Builder