NOT ALL RJ-45S ARE CREATED EQUAL
FEATURING SENTINEL CONNECTOR SYSTEMS - WHEN SIGNAL INTEGRITY MATTERS
          Shipping Over 100,000,000 RJ45 Plugs a Year - MADE in USA

Cage Code 71SB6   DUNS 191497254    P:630-659-6337    dave@rj45s.com
             
111S08080090C34 
RJ45 Plug for Belden 7957A Category 5e DataTuff 600 Volt Cable




     
BELDEN Category 5e DataTuff® 600 Volt AWM
Rated Twisted Pair Cable

 Industrial Ethernet, Harsh Environments, Category 5e, Gigabit Ethernet, 100BaseTX, 100BaseVG ANYLAN, 155ATM, 622ATM, NTSC/PAL Component or Composite Video, AES/EBU Digital Audio, AES51, RS-422, Noisy Environments, CMX - Outdoor, EtherNet/IP™

7957A - 24 AWG Bonded-Pairs solid bare copper conductors, polyolefin insulation, overall Beldfoil® (100%coverage) plus tinned copper braid shield (70% coverage), drain wire, industrial grade sunlight- and oil-resistant PVC jacket. Seq. marking at 2 ft. intervals.



111S08080090C34

Stocked
111S08080090C34 Product Features

*   Shielded RJ45 plug with integral "C CRIMP" for increased shield effectiveness, added cable stress relief and additional strength
*   Utilizes a 4 over 4 contact design (4 LONG and 4 SHORT) that provides increased isolation and spatial dispersion within the plug to minimize crosstalk
* Accepts .044" - .048" CONDUCTOR OD and utilizes Patented Conductive Next Load Bar
*   The conductors are isolated by Plastic Isolation/Insulation Barriers where contact termination is made, thereby improving electrical performance.
  Plug accepts both SOLID or STRANDED conductors
*   Made in USA

111S08080090C34 Specifications 

Performance:    Meets or Exceeds ANSI/TIA 568-C.2 - ANSI/TIA 1096-B (Formerly FCC Part 68) - CENELEC EN 50173 -    
IEC 60603 - ISO-8877 - ISO/IEC 11801
Contact Material:   Phosphor Bronze - .012" thick
Contact Plating:   Minimum 50 Micro-Inch Pure Gold - Selective 24 Carat Hard Gold Plate in contact area over 100 Micro-Inch minimum Nickel Plate. Exceeds TIA-1096 specifications (formerly FCC Part 68)
Plug Material:   Polycarbonate
Plug Tolerances and Dimensions:   Meets TIA-1096 specifications (formerly FCC Part 68)
UL Recognized:   UL File #E188111
Flame Autoextinguish:   94-V0
Operating Temperature:   -40º C to +85º C
Insertion/Extraction Life:   1000 Minimum Cycles
Contact Resistance:  10 Milli-Ohms maximum
Current/Voltage:   30 VAC/42 VDC at 1.5 Amps
Compliance:   RoHS Compliant

COMPLEMENTARY PRODUCTS TO DO THE JOB RIGHT



900007


Terminates Both
Contacts and "C" Crimp


TERMINATION TOOL

Professional Grade - Controlled Ratchet Style
Insures Proper Blade Setting Depth
1,000,000 Cycles Minimum

 
DO NOT TAKE THIS STEP FOR GRANTED
Cable assemblies built using inadequate or poor quality tools and dies.....worn out tooling.....or mismatched tooling, WILL HAVE A MAJOR IMPACT ON THE PERFORMANCE
OF THE CABLE ASSEMBLY.

111SS08080090C34 Termination Instructions  






900007

111-08080090L34











3M™ 1181


 

PROPER CABLE PREPARATION INCLUDES COPPER SHIELDING TAPE TO MAINTAIN SHIELD INTEGRITY & PROVIDING A PLACE FOR THE "C CRIMP" SHIELD ON THE CABLE

3M™
1181
1/2" Copper Foil
Shielding Tape
with Conductive Adhesive




Load Bar Shown in Picture


3M 1181 Copper Foil Shielding Tape
 
 


EPS-300


3M™ HEAT SHRINK TUBING


1/2 Inch Diameter
Adhesive-Lined, 3:1, Flexible, Polyolefin

"Lock" Everything in Place
Sold in 3 Inch Lengths

 

EPS-300 Heat Shrink

The RJ-45 Is A Highly Engineered Interconnection System

CAVEAT EMPTOR.....Let The Buyer Beware

SUB-STANDARD, NON-COMPLIANT and COUNTERFEIT RJ45's coming in from the Far East

KNOW THE STANDARDS - KNOW THE SPECS - INSIST ON COMPLIANCE - KNOW YOUR SUPPLIERS



For more information, contact
dave@rj45s.com

RJ45s.com
2400 East Main Street
St Charles, IL 60174
phone: 630-659-6337
fax: 888-210-4593


 
                                                                                                                      


Website Builder