NOT ALL RJ-45S ARE CREATED EQUAL
FEATURING SENTINEL CONNECTOR SYSTEMS - WHEN SIGNAL INTEGRITY MATTERS
          Shipping Over 100,000,000 RJ45 Plugs a Year - MADE in USA

Cage Code 71SB6   DUNS 191497254    P:630-659-6337    dave@rj45s.com





The Road To Category 8.1 RJ45 Connectivity




  • HESS consists of the PCB Jack, Jack Inserts, Tunable PCB’s and Plug/Cable Assemblies
  • Over three (3) Years in Research and Development – Multiple Patents Pending
  • Multiple PCB Iterations were made to Compare then Customize S Parameter Characteristics to the customer requirements
  • PCB traces can be made 50 Ohm single ended or 100 Ohm Differential Pair


Category 8.1 PCB Jack


    


The need for a 2 gigahertz broadband I/O connector for Category 8.1 was met with a different approach to manufacturing.

Traditionally, RJ45 jacks were manufactured using a wire or stamped lead frames to connect the input to output pins of the jack. In our patent pending design, we used a multi layer PCB to connect input to output. The ground layers in the PCB are used for isolation of critical pairs for crosstalk reduction while allowing space to add compensation circuits to tune electrical parameters. Compensation can now be closer to the source of the signals, allowing a broader bandwidth.  This is not possible with traditional manufacturing technologies. 



PCB Jack Insert


 

      






Category 8.1 Plug Test Cable






Test Set Up and S Parameters









For more information, please contact dave@rj45s.com



 
                                                                                                                  



Website Builder