NOT ALL RJ-45S ARE CREATED EQUAL
FEATURING SENTINEL CONNECTOR SYSTEMS - WHEN SIGNAL INTEGRITY MATTERS
          Shipping Over 100,000,000 RJ45 Plugs a Year - MADE in USA

Cage Code 71SB6   DUNS 191497254    P:630-659-6337    dave@rj45s.com

             

111S08080095LA4

OR
111S08080062L34 (END "A") AND
111S08080063L34 (END "B") 
RJ45 Plugs for Quabbin DataMax® Category 6A 10Gig F/UTP Patch Cables

                      

                        


Shielded F/UTP (relaxed foil tape) flexible patch/jumper cable designed for shielded networks transmitting 10GBase-T (10 Gigabit Ethernet). Exceeds augmented Cat 6a patch cable requirements enabling 100 meter channels and is backward compatible with Cat 6 and 5e hardware. Minimizes Alien Crosstalk (AXT) noise and terminates to high-performance shielded modular plugs. Tested to 500 MHz. RoHS compliant.

Includes part numbers 2246 (Black), 2247 (Brown), 2248 (Red), 2249 (Orange), 2250 (Yellow), 2251 (Green), 2252 (Blue), 2253 (Violet), 2254 (Gray), 2255 (White), 2256 (Beige), 2257 (Pink) and 2258 (Aqua).



 
111S08080095LA4


END "A"
     111S08080062L34







     
111S08080062L34


  END "B"
     111S08080062L34






    
111S08080063L34



111S08080095LA4
111S08080062L34 (END "A") and 111S08080063L34 (END "B")
Product Features

Are to be used in conjunction with each other (one goes on one end of the patch cable
and the other one goes on the other end).


*   Incorporates a PATENTED CONDUCTIVE NEXT Reduction System. In addition to providing PRECISE CONDUCTOR ALIGNMENT, the Composite Carbon/Graphite Fiber Conductor Load Bar GREATLY REDUCES NEXT and RETURN LOSS by ABSORBING REFLECTIONS and CHANNELING IT AWAY FROM THE CONDUCTORS. Using recommended termination procedures and equipment, ANSI/TIA/EIA 568 Category 6 performance levels are achievable with good workmanship and certified cables.
*   Utilizes a straight across 8 or 2 over 6 (2 short and 6 Long, END A) and 6 over 2 (6 short and 2 long, END B) contact design that provides increased isolation and spatial dispersion within the plug to minimize crosstalk and accepts .037" - 042" CONDUCTOR OD. 
*   The conductors are isolated by the Conductor Load Bar and through Plastic Isolation/Insulation Barriers where contact termination is made, thereby improving electrical performance.
  Plug accepts both SOLID or STRANDED conductors
*   Made in USA

111S08080095LA4 Specifications
111S08080062L34 Specifications 
111S08080063L34 Specifications 

Performance:    Meets or Exceeds ANSI/TIA 568-C.2 - ANSI/TIA 1096-B (Formerly FCC Part 68) - CENELEC EN 50173 -
IEC 60603 - ISO-8877 - ISO/IEC 11801
Contact Material:   Phosphor Bronze - .012" thick
Contact Plating:   Minimum 50 Micro-Inch Pure Gold - Selective 24 Carat Hard Gold Plate in contact area over 100 Micro-Inch minimum Nickel Plate. Exceeds TIA-1096 specifications (formerly FCC Part 68)
Plug Material:   Polycarbonate
Plug Tolerances and Dimensions:   Meets TIA-1096 specifications (formerly FCC Part 68)
UL Recognized:   UL File #E188111
Flame Autoextinguish:   94-V0
Operating Temperature:   -40º C to +85º C
Insertion/Extraction Life:   1000 Minimum Cycles
Contact Resistance:  10 Milli-Ohms maximum
Current/Voltage:   30 VAC/42 VDC at 1.5 Amps
Compliance:   RoHS Compliant

COMPLEMENTARY PRODUCTS TO DO THE JOB RIGHT



900005
(with factory installed die set 900216)

TERMINATION TOOL

Professional Grade - Controlled Ratchet Style
Insures Proper Blade Setting Depth
1,000,000 Cycles Minimum

 
DO NOT TAKE THIS STEP FOR GRANTED
Cable assemblies built using inadequate or poor quality tools and dies.....worn out tooling.....or mismatched tooling, WILL HAVE A MAJOR IMPACT ON THE PERFORMANCE OF THE CABLE ASSEMBLY.

111S08080062L34/63L34 Termination Instructions  

             






            
           
900005

            





111-08080090L34








           
3M™ 1181


 

PROPER CABLE PREPARATION INCLUDES COPPER SHIELDING TAPE TO MAINTAIN SHIELD INTEGRITY & PROVIDING A PLACE FOR THE "C CRIMP" SHIELD ON THE CABLE

3M™ 1181
1/2" Copper Foil
Shielding Tape
with Conductive Adhesive

           


  

           

3M 1181 Copper Foil Shielding Tape
 

 


EPS-300


3M™ HEAT SHRINK TUBING


1/2 Inch Diameter
Adhesive-Lined, 3:1, Flexible, Polyolefin

"Lock" Everything in Place
Sold in 3 Inch Lengths

 

EPS-300 Heat Shrink










                                                                                                                      


Website Builder