Shipping Over 100,000,000 RJ45 Plugs a Year - MADE in USA
Cage Code 71SB6 DUNS 191497254 P:630-659-6337 dave@rj45s.com
111-08080028L34
RJ45 Plug for Berk-Tek HyperPlus 5e Plenum Category 5e UU/TP Plenum Cables - .210" OD
HyperPlus 5e Plenum Rated
Category 5e UTP
No Spline - .210" OD
Includes part numbers 110032205 (Dark Grey Reel in a Box), 10032206 (Dark Grey Reel), 10032207 (Dark Grey Box), 10032221 (White Reel in a Box), 10032222 (White Reel), 10032223 (White Box), 10032224 (Pink Reel in a Box), 10032225 (Blue Reel in a Box), 10032226 (Blue Reel), 10032227 (Blue Box), 10032228 (Red Reel), 10032229 (Red Box), 10032230 (Green Reel in a Box), 10032231 (Green Reel), 10032232 (Green Box), 10032233 (Yellow Reel in a Box), 10032234 (Yellow Reel), 10032235 (Yellow Box), 10032236 (Orange Box), 10033516 (Orange Reel), 10033518 (Orange Reel in a Box), 10033521 (Black Box), 10033807 (Black Reel), 10033814 (Pink Box), 10034145 (Pink Reel), 10034885 (Violet Box), 10035124 (Violet Reel), 10060673 (Red Reel in a Box), 110747746 (White smartPak Box) and 110747747 (Grey smartPak Box)
* Incorporates a PATENTED CONDUCTIVE NEXT Reduction System. In addition to providing PRECISE CONDUCTOR ALIGNMENT, the Composite Carbon/Graphite Fiber Conductor Load Bar GREATLY REDUCES NEXT and RETURN LOSS by ABSORBING REFLECTIONS and CHANNELING IT AWAY FROM THE CONDUCTORS. Using recommended termination procedures and equipment, ANSI/TIA-568.2D Category 5e performance levels are achievable with good workmanship and certified cables.
* Utilizes a 4 over 4 contact design (4 LONG and 4 SHORT) that provides increased isolation and spatial dispersion within the plug to minimize crosstalk and accepts .037" - 042" CONDUCTOR OD.
* The conductors are isolated through Plastic Isolation/Insulation Barriers where contact termination is made, thereby improving electrical performance.
* Plug accepts both SOLID or STRANDED conductors
* Made in USA
111-08080028L34 Specifications
Performance: Meets or Exceeds ANSI/TIA-568.2-D - ANSI/TIA 1096 (Formerly FCC Part 68) - CENELEC EN 50173 -
IEC 60603 - ISO-8877 - ISO/IEC 11801
Contact Material: Phosphor Bronze - .012" thick
Contact Plating: Minimum 50 Micro-Inch Pure Gold - Selective 24 Carat Hard Gold Plate in contact area over 100 Micro-Inch minimum Nickel Plate. Exceeds TIA-1096 specifications (formerly FCC Part 68)
Plug Material: Polycarbonate
Plug Tolerances and Dimensions: Meets TIA-1096 specifications (formerly FCC Part 68)
UL Recognized: UL File #E188111
Flame Autoextinguish: 94V-0
Operating Temperature: -40º C to +85º C
Insertion/Extraction Life: 1000 Minimum Cycles
Contact Resistance: 10 Milli-Ohms maximum
Current/Voltage: 30 VAC/42 VDC at 1.5 Amps
Compliance: RoHS Compliant
COMPLEMENTARY PRODUCTS TO "DO THE JOB RIGHT" |
||
 900005/900216 |
TERMINATION TOOL Professional Grade Controlled Ratchet Style Insures Proper Blade Setting Depth 1,000,000 Cycles Minimum DO NOT TAKE THIS STEP FOR GRANTED Cable assemblies built using inadequate or poor quality tools and dies.....worn out tooling.....or mismatched tooling, WILL HAVE A MAJOR IMPACT ON THE PERFORMANCE OF THE CABLE ASSEMBLY. 111-08080028L34 Termination Instructions |
|
|
|
SNAGLESS STRAIN RELIEF BOOT OPTIONS |
6MM Boots |
 EPS-300 |
3M™ HEAT SHRINK TUBING 1/2 Inch Diameter Adhesive-Lined, 3:1, Flexible, Polyolefin "Lock" Everything in Place Sold in 1 1/2 Inch Lengths  |
|
CAVEAT EMPTOR.....Let The Buyer Beware
SUB-STANDARD, NON-COMPLIANT and COUNTERFEIT RJ45's coming in from the Far East
KNOW THE STANDARDS - KNOW THE SPECS - INSIST ON COMPLIANCE - KNOW YOUR SUPPLIERSFor more information, contact
dave@rj45s.com
RJ45s.com
2400 East Main Street
St Charles, IL 60174
phone: 630-659-6337
