The RJ-45 Is A Highly Engineered Interconnection System

CAVEAT EMPTOR.....Let The Buyer Beware
SUB-STANDARD, NON-COMPLIANT and COUNTERFEIT RJ45's coming in from the Far East
KNOW THE STANDARDS - KNOW THE SPECS - INSIST ON COMPLIANCE - KNOW YOUR SUPPLIERS

We have been inundated with emails and phone calls from around the globe from companies experiencing problems with RJ-45's. It is very disturbing to find out that many of these problems relate to the RJ-45 plug/jack NOT MEETING THE MINIMUM MECHANICAL or MATERIAL STANDARDS REGARDING GOLD PLATING, PLASTIC HOUSING MATERIAL and CONTACT DESIGN/DIMENSIONS as set forth by standards bodies such as ACTA, ASTM, EIA, FCC, IEC, IEEE, ISO, TIA and UL. As a result, there is a TICKING TIME BOMB WITH OXIDATION, CONDUCTIVITY, CONTACT RESISTANCE AND CORROSION that may cause complete signal transmission loss or intermittent contact (that alternates rapidly between a high and low resistance), which is the worst nightmare for anyone who has to troubleshoot network equipment

ALL PRODUCTS MEET/EXCEED THE FOLLOWING STANDARDS
ANSI/TIA-568.2-D - ANSI/TIA 1096-B (Formerly FCC Part 68)
CENELEC EN 50173 - IEC 60603 - ISO-8877 - ISO/IEC 11801 - UL 1863 (1000v)

SHIELDED PLUGS

PROPER PLUG SELECTION IS CRITICAL FOR THE DESIRED PERFORMANCE
All Plugs Can Be Used with Either SOLID and STRANDED Conductors

Critical Dimensions -  Cable Conductor OD and Jacket OD

Click on Part Number to view Product Specifications, Recommended Tooling,
Termination Instructions and Place Order

Part Number
Click on Blue Link for Detailed Specs
Category Contact Design Insulated Conductor OD Jacket OD Picture
106S08080058C34
Cage Code 71SB6
NSN
5935-01-528-2544
5935-01-576-2614
5935-01-560-2961
Category
5e
4 Over 4Up to .048" Up to .265"
106S080800D6H34
For use with
STRANDED CONDUCTORS ONLY
Category
6
4 Over 4.054" - .058"Up to .310"
110S080820-24Category
3
8 AcrossUp to .040".240"- .260"
110S080820C24Category
3
8 AcrossUp to .040".240"-.260"
111S08080016-34Category
5e
4 Over 4.037"- .042".240"-.260"
111S08080028C34Category
5e
4 Over 4.037"- .042"Up to .265"
111S08080028L34Category
5e
4 Over 4.037"- .042".240"- .260"
111S08080054C34Category
6
4 Over 4.037"- .042" Up to .265"
111S08080054H34Category
6
4 over 4.037"-.042"Up to .310"
111S08080054L34Category
6
4 over 4.037"-.042" .240"-.260"
111S08080056-34Category
6
4 over 4 .039"-.043" .240"-.260"
111S08080056C34
Cage Code 71SB6
NSN
5935-01-591-2843
Category
5e
4 over 4 .039"-.043" Up to .265"
111S08080062L34
AND
111S08080063L34
Category
6
2 over 6
AND
6 over 2
.037"-.042" .240"-.260"
111S08080090C34Category
6
4 over 4 .044"-.048" Up to .265"
111S08080090H34
Category
6 and 6A
4 over 4 .044"-.048" Up to 310"
111S08080090L34
Category
6
4 over 4 .044"-.048" .240"-.260"
111S08080091C34
Category
6
4 over 4 .048"-.052" Up to .265"
111S08080091H34
Category
6 and 6A
4 over 4 .048"-.052" Up to 310"
111S08080091L34
Category
6
4 over 4 .048"-.052" .240"- .260"
111S08080095HA4
Category
6
8 Across .037"-.042" Up to .310"
111S08080095LA4
Category
6/6a
8 Across .037"-.042" .240"-.260"
111S080800C7LA4
For Use With
STRANDED CONDUCTORS ONLY
Category
6/6a
8 Across .037"-.040" .194" Max
111S080800D4LA4
For Use With
STRANDED CONDUCTORS ONLY
Category
6/6a
8 Across .030"-.035" .194" Max
111S080800F3LA4
For Use With
STRANDED CONDUCTORS ONLY
Category
6/6a
8 Across.031"-.033" .186" Max
114S040800C34
N/A1, 2, 3 and 6.055"-.060" Up to .265"
Part NumberCategoryContact DesignInsulated Conductor ODJacket ODPicture

SPECIFICATIONS:

Performance: Meets or Exceeds ANSI/TIA 568-2.D - ANSI/TIA 1096 (Formerly FCC Part 68) - ANSI/TIA 968-A - CENELEC EN 50173 - IEC 60603 - ISO-8877 - ISO/IEC 11801
Contact Material: Phosphor Bronze - .012" thick
Contact Plating: Minimum 50 Micro-Inch Pure Gold - Selective 24 Carat Hard Gold Plate in contact area over 100 Micro-Inch minimum Nickel Plate. Exceeds TIA-1096 specifications (formerly FCC Part 68)
Plug Material: Polycarbonate
Plug Tolerances and Dimensions: Meets TIA-1096 specifications (formerly FCC Part 68)
UL Recognized: UL File #E188111 - UL 1863 (1000v)
Flame Autoextinguish: 94V-0
Operating Temperature: -40º C to +85º C
Insertion/Extraction Life: 1000 Minimum Cycles
Contact Resistance: 10 Milli-Ohms maximum
Current/Voltage: 30 VAC/57 VDC at 1.5 Amps
Compliance: RoHS Compliant
PoE: Meets requirements of 15W PoE (IEEE 802.3af), 30W PoE+ (IEEE 802.3at), 60W PoE++ (IEEE 802.3bt Type 3) and 100W PoE++ (IEEE 802.3bt Type 4)