The RJ-45 Is A Highly Engineered Interconnection System
CAVEAT EMPTOR.....Let The Buyer Beware
SUB-STANDARD, NON-COMPLIANT and COUNTERFEIT RJ45's coming in from the Far East
KNOW THE STANDARDS - KNOW THE SPECS - INSIST ON COMPLIANCE - KNOW YOUR SUPPLIERS
We have been inundated with emails and phone calls from around the globe from companies experiencing problems with RJ-45's. It is very disturbing to find out that many of these problems relate to the RJ-45 plug/jack NOT MEETING THE MINIMUM MECHANICAL or MATERIAL STANDARDS REGARDING GOLD PLATING, PLASTIC HOUSING MATERIAL and CONTACT DESIGN/DIMENSIONS as set forth by standards bodies such as ACTA, ASTM, EIA, FCC, IEC, IEEE, ISO, TIA and UL. As a result, there is a TICKING TIME BOMB WITH OXIDATION, CONDUCTIVITY, CONTACT RESISTANCE AND CORROSION that may cause complete signal transmission loss or intermittent contact (that alternates rapidly between a high and low resistance), which is the worst nightmare for anyone who has to troubleshoot network equipment. For THE SOLUTION......
ALL PRODUCTS MEET/EXCEED THE FOLLOWING STANDARDS
ANSI/TIA 568.2-D - ANSI/TIA 1096 (Formerly FCC Part 68)
CENELEC EN 50173 - IEC 60603 - ISO-8877 - ISO/IEC 11801 - UL 1863
UNSHIELDED PLUGS
PROPER PLUG SELECTION IS CRITICAL FOR THE DESIRED PERFORMANCE
Select-A-Plug Matrix
All Plugs Can Be Used with Either SOLID and STRANDED Conductors
Critical Dimensions - Conductor OD and Jacket OD
Click on Part Number to view Product Specifications, Recommended Tooling,
Termination Instructions and Place Order
Part Number Click on Blue Link for Detailed Specs | Category | Contact Design | Conductor OD | Jacket OD | Picture |
---|---|---|---|---|---|
106-080800-34 Replaces AMP 5-569278-3 Cage Code 71SB6 NSN 5935-01-539-4877 | Category 5e | 4 Over 4 | .037"-.042" | .240" | |
106-08080058-34 Cage Code 71SB6 NSN 5935-01-528-2544 | Category 5e | 4 Over 4 | Up to .048" | .240"-.260" | |
109-080840-24 Direct Replacement for AMP 5-554739-3 | Category 5e | 8 Across | Up to .038" | .240"-.260" | |
110-080820-24 Direct Replacement for AMP 5-554739-3 | Category 5e | 8 Across | Up to .040" | .240"-.260" | |
111-0808LB16-34 | Category 5e | 4 Over 4 | .037"-.042" | .240"-.260" | |
111-08080028L34 | Category 5e | 4 Over 4 | .037"-.042" | .240"-.260" | |
111-080800-34 | Category 6 | 4 Over 4 | .037"-.042" | .240" | |
111-08080054L34 | Category 6 | 4 Over 4 | .037"-.042" | .240"-.260" | |
111-08080062L34 AND 111-08080063L34 | Category 6 | 2 over 6 and 6 over 2 | 037"-.042" | .240"-.260" | |
111-08080090L34 | Category 6 | 4 over 4 | .044"-.048" | .240"-.260" | |
111-08080091L34 | Category 6 | 4 over 4 | .048"-.052" | .240"-.260" | |
111-08080095LA4 Replaces Ideal 85-366 | Category 6/6a | 8 Across | 037"-.042" | .240"-.260" | |
111-080800B5LA4 For 28AWG STRANDED Conductors Only | Category 6/6a | 8 Across | .024"-.028" | Up to .155" | |
111-080800D1LA4 For 28AWG STRANDED Conductors Only | Category 6/6a | 8 Across | .024"-.028" | Up to .155" |
SPECIFICATIONS:
Performance: Meets or Exceeds ANSI/TIA 568-2.D - ANSI/TIA 1096 (Formerly FCC Part 68) - ANSI/TIA 968-A - CENELEC EN 50173 - IEC 60603 - ISO-8877 - ISO/IEC 11801
Contact Material: Phosphor Bronze - .012" thick
Contact Plating: Minimum 50 Micro-Inch Pure Gold - Selective 24 Carat Hard Gold Plate in contact area over 100 Micro-Inch minimum Nickel Plate. Exceeds TIA-1096 specifications (formerly FCC Part 68)
Plug Material: Polycarbonate
Plug Tolerances and Dimensions: Meets TIA-1096 specifications (formerly FCC Part 68)
UL Recognized: UL File #E188111 - UL 1863 (1000v)
Flame Autoextinguish: 94V-0
Operating Temperature: -40º C to +85º C
Insertion/Extraction Life: 1000 Minimum Cycles
Contact Resistance: 10 Milli-Ohms maximum
Current/Voltage: 30 VAC/57 VDC at 1.5 Amps
Compliance: RoHS Compliant
PoE: Meets requirements of 15W PoE (IEEE 802.3af), 30W PoE+ (IEEE 802.3at), 60W PoE++ (IEEE 802.3bt Type 3) and 100W PoE++ (IEEE 802.3bt Type 4)