111S08080090H34
RJ45 Plug for Superior Essex 10Gain® XP Category 6A CMR-LP Riser Cables
Click in Box for PayPal Drop Down Menu
1-99 – $2.45
100-999 – $2.16
1000 – $1.88
Can’t Use PayPal?….email order
SENTINEL RECOMMENDS A SHIELDED PLUG FOR THIS UTP CABLE DUE TO THE LARGE CABLE OD AND CONSTRUCTION.
“C CRIMP” SHIELD ATTACHES TO CABLE JACKET FOR ADDED STRAIN RELIEF
Description
10Gain® XP Category 6A CMR-LP Riser Cables
Includes part numbers 6H-272-2A (Blue Reel), 6H-272-3A (Gray Reel), 6H-272-4A (White Reel), 6H-272-5A (Green Reel), 6H-272-6A (Yellow Reel), 6H-272-7A (Purple Reel), 6H-272-9A (Red Reel), 6H-272-DA (Orange Reel) and 6H-272-EA (Black Reel)
6H-246-2A (Blue BrakeBox), 6H-246-3A (Gray BrakeBox ), 6H-246-4A (White BrakeBox), 6H-246-5A (Green BrakeBox), 6H-246-6A (Yellow BrakeBox), 6H-246-7A (Purple BrakeBox), 6H-246-9A (Red BrakeBox), 6H-246-DA (Orange BrakeBox) and 6H-246-EA (Black BrakeBox)
111S08080090H34 Product Features
* Shielded RJ45 plug with integral “C CRIMP” for increased shield effectiveness, added cable stress relief and additional strength. Accepts up to a .310″ cable jacket OD
* Incorporates a PATENTED CONDUCTIVE NEXT Reduction System. In addition to providing PRECISE CONDUCTOR ALIGNMENT, the Composite Carbon/Graphite Fiber Conductor Load Bar GREATLY REDUCES NEXT and RETURN LOSS by ABSORBING REFLECTIONS and CHANNELING IT AWAY FROM THE CONDUCTORS. Using recommended termination procedures and equipment, ANSI/TIA 568.2-D Category 6 performance levels are achievable with good workmanship and certified cables.
* Utilizes a 4 over 4 contact design (4 LONG and 4 SHORT) that provides increased isolation and spatial dispersion within the plug to minimize crosstalk and accepts .044″ – 048″ INSULATED CONDUCTOR OD.
* The conductors are isolated by the Conductor Load Bar and through Plastic Isolation/Insulation Barriers where contact termination is made, thereby improving electrical performance.
* Plug accepts both SOLID or STRANDED conductors
* Made in USA
111S08080090H34 Specifications
Performance: Meets or Exceeds ANSI/TIA 568.2-D – ANSI/TIA 1096 (Formerly FCC Part 68) – ANSI/TIA 968-A – CENELEC EN 50173 – IEC 60603 – ISO-8877 – ISO/IEC 11801
Contact Material: Phosphor Bronze – .012″ thick
Contact Plating: Minimum 50 Micro-Inch Pure Gold – Selective 24 Carat Hard Gold Plate in contact area over 100 Micro-Inch minimum Nickel Plate. Exceeds TIA-1096 specifications (formerly FCC Part 68)
Plug Material: Polycarbonate
Plug Tolerances and Dimensions: Meets TIA-1096 specifications (formerly FCC Part 68)
UL Recognized: UL File #E188111 – UL 1863 (1000v)
Flame Autoextinguish: 94V-0
Operating Temperature: -40º C to +85º C
Insertion/Extraction Life: 1000 Minimum Cycles
Contact Resistance: 10 Milli-Ohms maximum
Current/Voltage: 30 VAC/57 VDC at 1.5 Amps
Compliance: RoHS Compliant
PoE: Meets requirements of 15W PoE (IEEE 802.3af), 30W PoE+ (IEEE 802.3at), 60W PoE++ (IEEE 802.3bt Type 3) and 100W PoE++ (IEEE 802.3bt Type 4)
COMPLEMENTARY PRODUCTS TO “DO THE JOB RIGHT”
|
||
Terminates Both Contacts and “C” Crimp |
TERMINATION TOOL
Professional Grad DO NOT TAKE THIS STEP FOR GRANTED Cable assemblies built using inadequate or poor quality tools and dies…..worn out tooling…..or mismatched tooling, WILL HAVE A MAJOR IMPACT ON THE PERFORMANCE OF THE CABLE ASSEMBLY. |
|
SNAGLESS STRAIN RELIEF BOOT OPTIONS 8MM SNAGLESS BOOT Accepts up to 8MM Jacket OD (.314″) Care must be taken to fully wrap the C CRIMP around the Cable (360º) to insure proper fit. Color Options: |
8MM Boots | |
|
3M™ HEAT SHRINK TUBING
1/2 Inch Diameter |
Additional information
Option | 1-99, 100-999, 1000 |
---|
The RJ-45 Is A Highly Engineered Interconnection System
CAVEAT EMPTOR.....Let The Buyer Beware
SUB-STANDARD, NON-COMPLIANT and COUNTERFEIT RJ45's coming in from the Far East
KNOW THE STANDARDS - KNOW THE SPECS - INSIST ON COMPLIANCE - KNOW YOUR SUPPLIERS
For more information, contact
[email protected]
RJ45s.com
2400 East Main Street
St. Charles, IL 60174
phone: (630) 659-6337