RJ45s.com
RJ45s.com
RJ45s.com
RJ45s.com

111S08080095HA4

RJ45 Plug for Belden 10GX24 Category 6A U/UTP LSZH Cables- .295″ OD

RJ45s.com

111S08080095HA4



Click in Box for PayPal Drop Down Menu
1-99 – $2.45
100-999 – $2.16
1000 – $1.88
Can’t Use PayPal?….
email order

RJ45s.com

 

Description

RJ45s.com

10GX24 Category 6A Non-Bonded-Pair UTP LSZH Cable

With Double H Spline – .295″ OD

CAT6A (625MHz), 4-Pair, U/UTP-Unshielded, Zero Halogen, Premise Horizontal Cable, 23 AWG Solid Bare Copper Conductors, Polyolefin Insulation, Patented Double-H Spline, Ripcord, LSZH Jacket

Includes Part Numbers:
10GX24 10305 Black
10GX24 06305 Blue – 10GX24 0061000 Blue
10GX24 08305 Gray – 10GX24 08500 Gray
10GX24 071000 Purple – 10GX24 07305 Purple – 10GX24 0071000 Purple – 10GX24 07500 Purple
10GX24 09305 White – 10GX24 0091000 White – 10GX24 09500 White
10GX24 04305 Yellow – 10GX24 0041000 Yellow

DUE TO THE LARGE CABLE OD AND CONSTRUCTION SENTINEL RECOMMENDS A SHIELDED PLUG WITH THE C CRIMP ATTACHED TO THE OUTER JACKET

 

111S08080095HA4 Product Features

* Shielded RJ45 plug with integral “C CRIMP” for added cable stress relief and additional strength. Accepts up to .037″-.042″ Insulated Conductor OD’s and up to a .310″ cable jacket OD
* Incorporates a PATENTED CONDUCTIVE NEXT Reduction System. In addition to providing PRECISE CONDUCTOR ALIGNMENT, the Composite Carbon/Graphite Fiber Conductor Load Bar GREATLY REDUCES NEXT and RETURN LOSS by ABSORBING REFLECTIONS and CHANNELING IT AWAY FROM THE CONDUCTORS. Using recommended termination procedures and equipment, ANSI/TIA-568.2-D Category 6A performance levels are achievable with good workmanship and certified cables.
* Three piece design provides proper conductor feedthrough and precise alignment to insure consistent terminations and electrical performance measurements.
* The conductors are isolated by the Conductor Load Bars and through Plastic Isolation/Insulation Barriers at the front of the plug.
* Plug accepts both SOLID or STRANDED conductors
* Made in USA

111S08080095HA4 Specifications

Performance: Meets or Exceeds ANSI/TIA-568.2-D – TIA 1096 (Formerly FCC Part 68) – CENELEC EN 50173 –
IEC 60603 – ISO-8877 – ISO/IEC 11801
Contact Material: Phosphor Bronze – .012″ thick
Contact Plating: Minimum 50 Micro-Inch Pure Gold – Selective 24 Carat Hard Gold Plate in contact area over 100 Micro-Inch minimum Nickel Plate. Exceeds TIA-1096 specifications (formerly FCC Part 68)
Plug Material: Polycarbonate
Plug Tolerances and Dimensions: Meets TIA-1096 specifications (formerly FCC Part 68)
UL Recognized: UL File #E188111 – UL 1863 (1000v)
Flame Autoextinguish: 94V-0
Operating Temperature: -40º C to +85º C
Insertion/Extraction Life: 1000 Minimum Cycles
Contact Resistance: 10 Milli-Ohms maximum
Current/Voltage: 30 VAC/57 VDC at 1.5 Amps
Compliance: RoHS Compliant
PoE: Meets requirements of 15W PoE (IEEE 802.3af), 30W PoE+ (IEEE 802.3at), 60W PoE++ (IEEE 802.3bt Type 3) and 100W PoE++ (IEEE 802.3bt Type 4)

 

 

COMPLEMENTARY PRODUCTS TO “DO THE JOB RIGHT”

 

 

 

900020

Terminates Both
Contacts and “C” Crimp

 

TERMINATION TOOL

Professional Grade
Controlled Ratchet Style
Insures Proper Blade Setting Depth
1,000,000 Cycles Minimum


DO NOT TAKE THIS STEP FOR GRANTED

Cable assemblies built using inadequate or poor quality tools and dies…..worn out tooling…..or mismatched tooling, WILL HAVE A MAJOR IMPACT ON THE PERFORMANCE OF THE CABLE ASSEMBLY.



900020



8MM Boots


SNAGLESS STRAIN RELIEF BOOT OPTIONS


8MM SNAGLESS BOOT
Accepts up to 8MM Jacket OD (.314″)

Care must be taken to fully wrap the C CRIMP around the Cable (360º) to insure proper fit.

Color Options:
B0041 (Gray) – B0042 (Blue) – B0043 (White)
B0044 (Yellow) – B0046 (Red) – B0047 (Orange)
B0048 (Purple) – B0049 (Green) – B0051 (Black) – B0052 (Clear)

 

8MM Boots

 

3M™ EPS-300


3M™ HEAT SHRINK TUBING

1/2 Inch Diameter
Adhesive-Lined, 3:1, Flexible, Polyolefin

“Lock” Everything in Place
Sold in 1 1/2 Inch Lengths

 


3M EPS-300 Heat Shrink



Additional information

Option

1-99, 100-999, 1000

The RJ-45 Is A Highly Engineered Interconnection System

CAVEAT EMPTOR.....Let The Buyer Beware
SUB-STANDARD, NON-COMPLIANT and COUNTERFEIT RJ45's coming in from the Far East
KNOW THE STANDARDS - KNOW THE SPECS - INSIST ON COMPLIANCE - KNOW YOUR SUPPLIERS