111S080800F3LA4
Category 6a and 6 Shielded RJ45 Plug for STRANDED Insulated Conductors – .031″-.033″
With DUAL PATENTED Conductive NEXT Reduction System
Click in Box for PayPal Drop Down Menu
1-99 – $1.99
100-999 – $1.84
1000 – $0.79
Don’t Use PayPal….email order
NOTE: MUST use B00067L (shown below) to insure proper termination
Description
111S080800F3LA4 Product Features
For STRANDED Insulated Conductor OD’s of .031″-.033″
* Incorporates a DUAL PATENTED CONDUCTIVE NEXT Reduction System. In addition to providing PRECISE CONDUCTOR ALIGNMENT, the Composite Carbon/Graphite Fiber Conductor Load Bar GREATLY REDUCES NEXT and RETURN LOSS by ABSORBING REFLECTIONS and CHANNELING IT AWAY FROM THE CONDUCTORS. Using recommended termination procedures and equipment, ANSI/TIA 568.2-D Category 6a performance levels are achievable with good workmanship and certified cables.
* Utilizes standard 8 across contact design that provides increased isolation and spatial dispersion within the plug to minimize crosstalk and allow for up to a .031″ to .033″ MAXIMUM INSULATED CONDUCTOR OD.
* Plug accepts ONLY STRANDED conductors
* Made in USA
111S080800F3LA4 Specifications
Performance: Meets or Exceeds ANSI/TIA 568.2-D – ANSI/TIA 1096 (Formerly FCC Part 68) – ANSI/TIA 968-A – CENELEC EN 50173 – IEC 60603 – ISO-8877 – ISO/IEC 11801
Contact Material: Phosphor Bronze – .012″ thick
Contact Plating: Minimum 50 Micro-Inch Pure Gold – Selective 24 Carat Hard Gold Plate in contact area over 100 Micro-Inch minimum Nickel Plate. Exceeds TIA-1096 specifications (formerly FCC Part 68)
Plug Material: Polycarbonate
Plug Tolerances and Dimensions: Meets TIA-1096 specifications (formerly FCC Part 68)
UL Recognized: UL File #E188111 – UL 1863 (1000v)
Flame Autoextinguish: 94V-0
Operating Temperature: -40º C to +85º C
Insertion/Extraction Life: 1000 Minimum Cycles
Contact Resistance: 10 Milli-Ohms maximum
Current/Voltage: 30 VAC/57 VDC at 1.5 Amps
Compliance: RoHS Compliant
PoE: Meets requirements of 15W PoE (IEEE 802.3af), 30W PoE+ (IEEE 802.3at), 60W PoE++ (IEEE 802.3bt Type 3) and 100W PoE++ (IEEE 802.3bt Type 4)
COMPLEMENTARY PRODUCTS TO “DO THE JOB RIGHT”
|
||
TERMINATION TOOL Professional Grade
Cable assemblies built using inadequate or poor quality tools and dies….. worn out tooling….. or mismatched tooling, WILL HAVE A MAJOR IMPACT ON THE PERFORMANCE OF THE CABLE ASSEMBLY. 111-08080095LA4 Termination Instructions
|
|
|
B00067L |
MUST USE B00067L BOOT For Proper Termination |
|
3M™ HEAT SHRINK TUBING 1/2 Inch Diameter |
|
Additional information
Option | 1-99, 100-999, 1000 |
---|
The RJ-45 Is A Highly Engineered Interconnection System
CAVEAT EMPTOR.....Let The Buyer Beware
SUB-STANDARD, NON-COMPLIANT and COUNTERFEIT RJ45's coming in from the Far East
KNOW THE STANDARDS - KNOW THE SPECS - INSIST ON COMPLIANCE - KNOW YOUR SUPPLIERS
For more information, contact
[email protected]
RJ45s.com
2400 East Main Street
St. Charles, IL 60174
phone: (630) 659-6337