111S08080095HA4

Description

SYSTIMAX® GigaSPEED X10D® 1291B ETL Verified Category 6A F/UTP CMR Cables

With Spline – .296″ OD

760081364 Blue 1000 ft Reel – 760179564 Blue 3000 ft Reel

760081372 Green 1000 ft Reel – 760179556 Green 3000 ft Reel

760131540 Light Blue 3000 ft Reel

760081380 Orange 1000 ft Reel

760161646 Red 1000 ft Reel

760081398 Slate 1000 ft Reel – 760104729 Slate 3000 ft Reel

760081406 White 1000 ft Reel

111S08080095HA4 Product Features

* Shielded RJ45 plug with integral “C CRIMP” for added cable stress relief and additional strength. Accepts up to .037″-.042″ Insulated Conductor OD’s and up to a .310″ cable jacket OD
* Incorporates a PATENTED CONDUCTIVE NEXT Reduction System. In addition to providing PRECISE CONDUCTOR ALIGNMENT, the Composite Carbon/Graphite Fiber Conductor Load Bar GREATLY REDUCES NEXT and RETURN LOSS by ABSORBING REFLECTIONS and CHANNELING IT AWAY FROM THE CONDUCTORS. Using recommended termination procedures and equipment, ANSI/TIA 568.2-D Category 6A performance levels are achievable with good workmanship and certified cables.
* Three piece design provides proper conductor feedthrough and precise alignment to insure consistent terminations and electrical performance measurements.
* The conductors are isolated by the Conductor Load Bars and through Plastic Isolation/Insulation Barriers at the front of the plug.
* Plug accepts both SOLID or STRANDED conductors
* Made in USA

111S08080095HA4 Specifications

Performance: Meets or Exceeds ANSI/TIA 568.2-D – ANSI/TIA 1096 (Formerly FCC Part 68) – ANSI/TIA 968-A – CENELEC EN 50173 – IEC 60603 – ISO-8877 – ISO/IEC 11801
Contact Material: Phosphor Bronze – .012″ thick
Contact Plating: Minimum 50 Micro-Inch Pure Gold – Selective 24 Carat Hard Gold Plate in contact area over 100 Micro-Inch minimum Nickel Plate. Exceeds TIA-1096 specifications (formerly FCC Part 68)
Plug Material: Polycarbonate
Plug Tolerances and Dimensions: Meets TIA-1096 specifications (formerly FCC Part 68)
UL Recognized: UL File #E188111 – UL 1863 (1000v)
Flame Autoextinguish: 94V-0
Operating Temperature: -40º C to +85º C
Insertion/Extraction Life: 1000 Minimum Cycles
Contact Resistance: 10 Milli-Ohms maximum
Current/Voltage: 30 VAC/57 VDC at 1.5 Amps
Compliance: RoHS Compliant
PoE: Meets requirements of 15W PoE (IEEE 802.3af), 30W PoE+ (IEEE 802.3at), 60W PoE++ (IEEE 802.3bt Type 3) and 100W PoE++ (IEEE 802.3bt Type 4)

COMPLEMENTARY PRODUCTS TO “DO THE JOB RIGHT”
900020 Terminates Both Contacts and “C” Crimp	TERMINATION TOOL Professional Grade Controlled Ratchet Style Insures Proper Blade Setting Depth 1,000,000 Cycles Minimum DO NOT TAKE THIS STEP FOR GRANTED Cable assemblies built using inadequate or poor quality tools and dies…..worn out tooling…..or mismatched tooling, WILL HAVE A MAJOR IMPACT ON THE PERFORMANCE OF THE CABLE ASSEMBLY.	900020 Price Per Unit $435.00 USD
8MM Boots	SNAGLESS STRAIN RELIEF BOOT OPTIONS 8MM SNAGLESS BOOT Accepts up to 8MM Jacket OD (.314″) Care must be taken to fully wrap the C CRIMP around the Cable (360º) to insure proper fit. Color Options: B0041 (Gray) – B0042 (Blue) – B0043 (White) B0044 (Yellow) – B0046 (Red) – B0047 (Orange) B0048 (Purple) – B0049 (Green) – B0051 (Black) – B0052 (Clear)	8MM Boots
3M™ EPS-300	3M™ HEAT SHRINK TUBING 1/2 Inch Diameter Adhesive-Lined, 3:1, Flexible, Polyolefin “Lock” Everything in Place Sold in 1 1/2 Inch Lengths	3M EPS-300 Heat Shrink Price Per Piece $0.43 USD