Name: 2142A
SKU: 1656
Availability: InStock

Description

BELDEN® 2142A Category 6A Indoor/Outdoor CMR/CMX F/UTP Cable

With Spline – .300″ OD

CAT6A (625 MHz), 4 Pair, F/UTP-Foil Shielded, Indoor/Outdoor CMR-CMX Outdoor, Premise Horizontal Cable, 23 AWG Solid Bare Copper Conductors, Polyolefin Insulation, Patented EquiSpline™, Overall Beldfoil® Shield with Drain Wire, Ripcord, UV-Resistant PVC Jacket

Includes Part Numbers: 2142A 0101000 BLACK REEL

111S08080090H34 Product Features

* Shielded RJ45 plug with integral “C CRIMP” for added cable stress relief and additional strength. Accepts up to .044″-.048″ Insulated Conductor OD’s and up to a .310″ cable jacket OD
* Incorporates a PATENTED CONDUCTIVE NEXT Reduction System. In addition to providing PRECISE CONDUCTOR ALIGNMENT, the Composite Carbon/Graphite Fiber Conductor Load Bar GREATLY REDUCES NEXT and RETURN LOSS by ABSORBING REFLECTIONS and CHANNELING IT AWAY FROM THE CONDUCTORS. Using recommended termination procedures and equipment, ANSI/TIA-568.2-D Category 6A performance levels are achievable with good workmanship and certified cables.
* Two-piece design provides proper conductor feedthrough and precise alignment to insure consistent terminations and electrical performance measurements.
* The conductors are isolated by the Conductor Load Bars and through Plastic Isolation/Insulation Barriers at the front of the plug.
* Plug accepts both SOLID or STRANDED conductors
* Made in USA

111S08080090H34 Specifications

Performance: Meets or Exceeds ANSI/TIA 568.2-D – ANSI/TIA 1096 (Formerly FCC Part 68) – ANSI/TIA 968-A – CENELEC EN 50173 – IEC 60603 – ISO-8877 – ISO/IEC 11801
Contact Material: Phosphor Bronze – .012″ thick
Contact Plating: Minimum 50 Micro-Inch Pure Gold – Selective 24 Carat Hard Gold Plate in contact area over 100 Micro-Inch minimum Nickel Plate. Exceeds TIA-1096 specifications (formerly FCC Part 68)
Plug Material: Polycarbonate
Plug Tolerances and Dimensions: Meets TIA-1096 specifications (formerly FCC Part 68)
UL Recognized: UL File #E188111 – UL 1863 (1000v)
Flame Autoextinguish: 94V-0
Operating Temperature: -40º C to +85º C
Insertion/Extraction Life: 1000 Minimum Cycles
Contact Resistance: 10 Milli-Ohms maximum
Current/Voltage: 30 VAC/57 VDC at 1.5 Amps
Compliance: RoHS Compliant
PoE: Meets requirements of 15W PoE (IEEE 802.3af), 30W PoE+ (IEEE 802.3at), 60W PoE++ (IEEE 802.3bt Type 3) and 100W PoE++ (IEEE 802.3bt Type 4)

COMPLEMENTARY PRODUCTS TO “DO THE JOB RIGHT”

900020

Terminates Both
Contacts and “C” Crimp

TERMINATION TOOL

Professional Grade
Controlled Ratchet Style
Insures Proper Blade Setting Depth
1,000,000 Cycles Minimum

DO NOT TAKE THIS STEP FOR GRANTED

Cable assemblies built using inadequate or poor quality tools and dies…..worn out tooling…..or mismatched tooling,
WILL HAVE A MAJOR IMPACT ON THE PERFORMANCE OF THE CABLE ASSEMBLY.

3M™ 1181

PROPER CABLE PREPARATION INCLUDES COPPER SHIELDING TAPE TO MAINTAIN SHIELD INTEGRITY & PROVIDING A PLACE FOR THE “C CRIMP” SHIELD ON THE CABLE

3M™ 1181
1/2″ Copper Foil Shielding Tape
with Conductive Adhesive

8MM Boots

SNAGLESS STRAIN RELIEF BOOT OPTIONS

8MM SNAGLESS BOOT

Accepts up to 8MM Jacket OD (.314″)

Care must be taken to fully wrap the C CRIMP around the Cable (360º) to insure proper fit.

Color Options:
B0041 (Gray) – B0042 (Blue) – B0043 (White)
B0044 (Yellow) – B0046 (Red) – B0047 (Orange)
B0048 (Purple) – B0049 (Green) – B0051 (Black) – B0052 (Clear)

8MM Boots