RJ45s.com
RJ45s.com
RJ45s.com
RJ45s.com

111S08080090H34

RJ45 Plug for CommScope® Uniprise® Media 6® 65NS4+ Category 6 F/UTP Cables


111S08080090H34



Click in Box for PayPal Drop Down Menu
1-99 – $2.39
100-999 – $2.16
1000 – $1.64

Can’t Use PayPal?….email order

RJ45s.com

Description

CommScope® Uniprise® CS34R  Category 6 F/UTP Non-Plenum Cables

With Spline .288″ OD

UN884021804/10 | CS34R GRN C6 4/23 F/UTP RL 1KFT – CS34R Category 6 F/UTP Cable, non-plenum, green jacket, 4 pair count, 1000 ft (305 m) length, reel

8447404/10 – Media 6® 65NS4+ Category 6 F/UTP Cable, non-plenum, black jacket, 4 pair count, 1000 ft (305 m) length, reel

8852604/10 – Media 6® 65NS4+ Category 6 F/UTP Cable, non-plenum, grey jacket, 4 pair count, 1000 ft (305 m) length, reel

8852684/30 – Media 6® 65NS4+ Category 6 F/UTP Cable, non-plenum, grey jacket, 4 pair count, 3000 ft (305 m) length, reel

8859104/10 – Media 6® 65NS4+ Category 6 F/UTP Cable, non-plenum, blue jacket, 4 pair count, 1000 ft (305 m) length, reel

8859204/10 – Media 6® 65NS4+ Category 6 F/UTP Cable, non-plenum, yellow jacket, 4 pair count, 1000 ft (305 m) length, reel

8859304/10 – Media 6® 65NS4+ Category 6 F/UTP Cable, non-plenum, red jacket, 4 pair count, 1000 ft (305 m) length, reel

8866604/10 – Media 6® 65NS4+ Category 6 F/UTP Cable, non-plenum, white jacket, 4 pair count, 1000 ft (305 m) length, reel

88670004/10 – Media 6® 65NS4+ Category 6 F/UTP Cable, non-plenum, orange jacket, 4 pair count, 1000 ft (305 m) length, reel

111S08080090H34 Product Features

* Shielded RJ45 plug with integral “C CRIMP” for increased shield effectiveness, added cable stress relief and additional strength
* Incorporates a PATENTED CONDUCTIVE NEXT Reduction System. In addition to providing PRECISE CONDUCTOR ALIGNMENT, the Composite Carbon/Graphite Fiber Conductor Load Bar GREATLY REDUCES NEXT and RETURN LOSS by ABSORBING REFLECTIONS and CHANNELING IT AWAY FROM THE CONDUCTORS. Using recommended termination procedures and equipment, ANSI/TIA568.2-D Category 6 performance levels are achievable with good workmanship and certified cables.
* Utilizes a 4 over 4 contact design (4 LONG and 4 SHORT) that provides increased isolation and spatial dispersion within the plug to minimize crosstalk and accepts .044″ – 048″ CONDUCTOR OD and .310″ Jacket OD.
* The conductors are isolated by the Conductor Load Bar and through Plastic Isolation/Insulation Barriers where contact termination is made, thereby improving electrical performance.
* Plug accepts both SOLID or STRANDED conductors
* Made in USA

111S08080090H34 Specifications

Performance: Meets or Exceeds ANSI/TIA 568-2.D – ANSI/TIA 1096 (Formerly FCC Part 68) – ANSI/TIA 968-A – CENELEC EN 50173 – IEC 60603 – ISO-8877 – ISO/IEC 11801
Contact Material: Phosphor Bronze – .012″ thick
Contact Plating: Minimum 50 Micro-Inch Pure Gold – Selective 24 Carat Hard Gold Plate in contact area over 100 Micro-Inch minimum Nickel Plate. Exceeds TIA-1096 specifications (formerly FCC Part 68)
Plug Material: Polycarbonate
Plug Tolerances and Dimensions: Meets TIA-1096 specifications (formerly FCC Part 68)
UL Recognized: UL File #E188111 – UL 1863 (1000v)
Flame Autoextinguish: 94V-0
Operating Temperature: -40º C to +85º C
Insertion/Extraction Life: 1000 Minimum Cycles
Contact Resistance: 10 Milli-Ohms maximum
Current/Voltage: 30 VAC/57 VDC at 1.5 Amps
Compliance: RoHS Compliant
PoE: Meets requirements of 15W PoE (IEEE 802.3af), 30W PoE+ (IEEE 802.3at), 60W PoE++ (IEEE 802.3bt Type 3) and 100W PoE++ (IEEE 802.3bt Type 4)

 

 

COMPLEMENTARY PRODUCTS TO “DO THE JOB RIGHT”

 

 

900020

Terminates Both
Contacts and “C” Crimp

 

TERMINATION TOOL

Professional Grade
Controlled Ratchet Style
Insures Proper Blade Setting Depth
1,000,000 Cycles Minimum


DO NOT TAKE THIS STEP FOR GRANTED

Cable assemblies built using inadequate or poor quality tools and dies…..worn out tooling…..or mismatched tooling,
WILL HAVE A MAJOR IMPACT ON THE PERFORMANCE OF THE CABLE ASSEMBLY.


111S08080090H34 Termination Instructions



900020



3M™ 1181

 

PROPER CABLE PREPARATION INCLUDES COPPER SHIELDING TAPE TO MAINTAIN SHIELD INTEGRITY & PROVIDING A PLACE FOR THE “C CRIMP” SHIELD ON THE CABLE

3M™ 1181
1/2″ Copper Foil Shielding Tape
with Conductive Adhesive


3M 1181 Copper Foil Shielding Tape – Price Per Inch

 

 

3M 1181 Copper Foil Shielding Tape – 1 Roll (684 Inches)

 

8MM Boots
SNAGLESS STRAIN RELIEF BOOT OPTIONS


8MM SNAGLESS BOOT
Accepts up to 8MM Jacket OD (.314″)

Care must be taken to fully wrap the C CRIMP around the Cable (360º) to insure proper fit.

Color Options:
B0041 (Gray) – B0042 (Blue) – B0043 (White)
B0044 (Yellow) – B0046 (Red) – B0047 (Orange)
B0048 (Purple) – B0049 (Green) – B0051 (Black) – B0052 (Clear)

 

8MM Boots

3M™ EPS-300


3M™ HEAT SHRINK TUBING

1/2 Inch Diameter
Adhesive-Lined, 3:1, Flexible, Polyolefin

“Lock” Everything in Place
Sold in 1 1/2 Inch Lengths

 

3M EPS-300 Heat Shrink

 

Additional information

Select Option

1-99, 100-999, 1000

The RJ-45 Is A Highly Engineered Interconnection System

CAVEAT EMPTOR.....Let The Buyer Beware
SUB-STANDARD, NON-COMPLIANT and COUNTERFEIT RJ45's coming in from the Far East
KNOW THE STANDARDS - KNOW THE SPECS - INSIST ON COMPLIANCE - KNOW YOUR SUPPLIERS