114S040800C34
Selectively Loaded Contacts 1, 2, 3 and 6 (Ethernet Protocol)
RJ45 Plug for GORE® RCN8752 24 AWG Quad S/UTP (Dual 85% Braid) Cable – .150″-.162″ OD
(Specialty Versions, Controlled Impedance, 100 Ohms)
Click in Box for PayPal Drop Down Menu
1-99 – $4.99
100-999 – $4.62
1000 – $1.74
Don’t Use PayPal….email order
Description
Gore® RCN8752 S/UTP (Dual 85% Braid) Cable
24 AWG Stranded (19/36) SPC – .150″-.162″ OD
114S080800C34 Product Features
* Shielded RJ45 plug with integral “C CRIMP” for increased shield effectiveness, added cable stress relief and additional strength
* Using recommended termination procedures and equipment, meets or exceeds Category 5e ANSI/TIA 568.2-D performance levels.
* Utilizes Selectively Loaded Contacts in positions 1, 2, 3 and 6 (Ethernet Protocol) and accepts .055″ to .058″ INSULATED CONDUCTOR OD.
* The conductors are isolated by Plastic Isolation/Insulation Barriers where contact termination is made, thereby improving electrical performance.
* Plug accepts both SOLID or STRANDED conductors
* Made in USA
Performance: Meets or Exceeds ANSI/TIA 568.2-D – ANSI/TIA 1096 (Formerly FCC Part 68) – CENELEC EN 50173 – IEC 60603 – ISO-8877 – ISO/IEC 11801
Contact Material: Phosphor Bronze – .012″ thick
Contact Plating: Minimum 50 Micro-Inch Pure Gold – Selective 24 Carat Hard Gold Plate in contact area over 100 Micro-Inch minimum Nickel Plate. Exceeds TIA-1096 specifications (formerly FCC Part 68)
Plug Material: Polycarbonate
Plug Tolerances and Dimensions: Meets TIA-1096 specifications (formerly FCC Part 68)
UL Recognized: UL File #E188111
Flame Autoextinguish: 94-V0
Operating Temperature: -40º C to +85º C
Insertion/Extraction Life: 1000 Minimum Cycles
Contact Resistance: 10 Milli-Ohms maximum
Current/Voltage: 30 VAC/42 VDC at 1.5 Amps
Compliance: RoHS Compliant
|
COMPLEMENTARY PRODUCTS TO “DO THE JOB RIGHT”
|
||
|
Terminates Both |
TERMINATION TOOL Professional Grade DO NOT TAKE THIS STEP FOR GRANTED Cable assemblies built using inadequate or poor quality tools and dies…..worn out tooling…..or mismatched tooling,
WILL HAVE A MAJOR IMPACT ON THE PERFORMANCE OF THE CABLE ASSEMBLY.
|
|
 
|
PROPER CABLE PREPARATION INCLUDES COPPER SHIELDING TAPE TO MAINTAIN SHIELD INTEGRITY & PROVIDING A PLACE FOR THE “C CRIMP” SHIELD ON THE CABLE 3M™ 1181
|
|
|
3M™ HEAT SHRINK TUBING 1/2 Inch Diameter
|
|
Additional information
| Option | 1-99, 100-999, 1000 |
|---|
The RJ-45 Is A Highly Engineered Interconnection System
CAVEAT EMPTOR.....Let The Buyer Beware
SUB-STANDARD, NON-COMPLIANT and COUNTERFEIT RJ45's coming in from the Far East
KNOW THE STANDARDS - KNOW THE SPECS - INSIST ON COMPLIANCE - KNOW YOUR SUPPLIERS
For more information, contact
[email protected]
RJ45s.com
2400 East Main Street
St. Charles, IL 60174
phone: (630) 659-6337