Description

CommScope® SYSTIMAX® 1261F Category 5e F/UTP 80 V CM Cables

No Spline – .242″ OD

Includes part numbers 760031088 – slate jacket, 1000 ft reel and 760151787 – white jacket, 1000 ft reel

111S08080016-34 Product Features

* Incorporates a PLASTIC wire management system to provide PRECISE CONDUCTOR ALIGNMENT.
* Utilizes a 4 over 4 contact design (4 LONG and 4 SHORT) that provides increased isolation and spatial dispersion within the plug to minimize crosstalk and accepts .037″ – 042″ INSULATED CONDUCTOR OD.
* The conductors are isolated by the Conductor Load Bar and through Plastic Isolation/Insulation Barriers where contact termination is made, thereby improving electrical performance.
* Plug accepts both SOLID or STRANDED conductors
* Made in USA

111S08080016-34 Specifications

Performance: Meets or Exceeds ANSI/TIA 568.2-D – ANSI/TIA 1096 (Formerly FCC Part 68) – ANSI/TIA 968-A – CENELEC EN 50173 – IEC 60603 – ISO-8877 – ISO/IEC 11801
Contact Material: Phosphor Bronze – .012″ thick
Contact Plating: Minimum 50 Micro-Inch Pure Gold – Selective 24 Carat Hard Gold Plate in contact area over 100 Micro-Inch minimum Nickel Plate. Exceeds TIA-1096 specifications (formerly FCC Part 68)
Plug Material: Polycarbonate
Plug Tolerances and Dimensions: Meets TIA-1096 specifications (formerly FCC Part 68)
UL Recognized: UL File #E188111 – UL 1863 (1000v)
Flame Autoextinguish: 94V-0
Operating Temperature: -40º C to +85º C
Insertion/Extraction Life: 1000 Minimum Cycles
Contact Resistance: 10 Milli-Ohms maximum
Current/Voltage: 30 VAC/57 VDC at 1.5 Amps
Compliance: RoHS Compliant
PoE: Meets requirements of 15W PoE (IEEE 802.3af), 30W PoE+ (IEEE 802.3at), 60W PoE++ (IEEE 802.3bt Type 3) and 100W PoE++ (IEEE 802.3bt Type 4)

COMPLEMENTARY PRODUCTS TO “DO THE JOB RIGHT”

900005/900216

TERMINATION TOOL

Professional Grade
Controlled Ratchet Style
Insures Proper Blade Setting Depth
1,000,000 Cycles Minimum

DO NOT TAKE THIS STEP FOR GRANTED

Cable assemblies built using inadequate or poor quality tools and dies….. worn out tooling….. or mismatched tooling, WILL HAVE A MAJOR IMPACT ON THE PERFORMANCE OF THE CABLE ASSEMBLY.

111S08080016-34 Termination Instructions

3M™ 1181

PROPER CABLE PREPARATION INCLUDES COPPER SHIELDING TAPE TO MAINTAIN SHIELD INTEGRITY & PROVIDING A PLACE FOR THE “C CRIMP” SHIELD ON THE CABLE3M™ 1181
1/2″ Copper Foil Shielding Tapewith Conductive Adhesive

6MM Slim-Line Boot

6MM Boot

STRAIN RELIEF BOOT OPTIONS
For Jacket OD’s of up to 6MM (.240″)

STRAIN RELIEF
SNAGLESS BOOTS

Color Options:
B0013 (Blue) – B0028 (Light Gray)
B0029 (Dark Gray) – B0030 (Yellow)
B0031 (Green) – B0032 (Black) – B0033 (Purple)
B0034 (White) – B0035 (Red) and B0040 (Orange)

RUBBER PULL OVER STRAIN RELIEF
SNAGLESS BOOTS

Color Options:
B001 (light Gray) – B002 (Dark Gray)
B003 (Blue) – B004 (Yellow) – B005 (Green)
B006 (Black) – B007 (Purple) -B008 (White)
B009 (Red) – B0010 (Orange) and B0011 (Pink)

6MM Boots