111S08080054L34
RJ45 Plug for ABA Cat 6 F/UTP 26 AWG 400MHz Stranded CM Patch Cables – .228″ OD
Click in Box for PayPal Drop Down Menu
1-99 – $1.65
100-999 – $1.47
1000 – $.72
Can’t Use PayPal?….email order
Description
ABA Cat 6 400MHz 26 AWG Stranded Patch Cables
With Spline – .228″ OD
Includes part numbers: TAM2604N70BL (Black), TAM2604N70BU (Blue), TAM2604N70GN (Green), TAM2604N70GY (Gray), TAM2604N70ON (Orange), TAM2604N70VI (Violet), TAM2604N70RD (Red), TAM2604N70WH (White) and TAM2604N70YE (Yellow)
111S08080054L34 Product Features
* Incorporates a PATENTED CONDUCTIVE NEXT Reduction System. In addition to providing PRECISE CONDUCTOR ALIGNMENT, the Composite Carbon/Graphite Fiber Conductor Load Bar GREATLY REDUCES NEXT and RETURN LOSS by ABSORBING REFLECTIONS and CHANNELING IT AWAY FROM THE CONDUCTORS. Using recommended termination procedures and equipment, ANSI/TIA 568.2-D Category 6 performance levels are achievable with good workmanship and certified cables.
* Utilizes a 4 over 4 contact design (4 LONG and 4 SHORT) that provides increased isolation and spatial dispersion within the plug to minimize crosstalk and allow for up to a .042″ MAXIMUM INSULATED CONDUCTOR OD.
* The conductors are isolated by the Conductor Load Bar and through Plastic Isolation/Insulation Barriers where contact termination is made, thereby improving electrical performance.
* Plug accepts both SOLID or STRANDED conductors
* Made in USA
111S08080054L34 Specifications
Performance: Meets or Exceeds ANSI/TIA 568.2-D – ANSI/TIA 1096 (Formerly FCC Part 68) – ANSI/TIA 968-A – CENELEC EN 50173 – IEC 60603 – ISO-8877 – ISO/IEC 11801
Contact Material: Phosphor Bronze – .012″ thick
Contact Plating: Minimum 50 Micro-Inch Pure Gold – Selective 24 Carat Hard Gold Plate in contact area over 100 Micro-Inch minimum Nickel Plate. Exceeds TIA-1096 specifications (formerly FCC Part 68)
Plug Material: Polycarbonate
Plug Tolerances and Dimensions: Meets TIA-1096 specifications (formerly FCC Part 68)
UL Recognized: UL File #E188111 – UL 1863 (1000v)
Flame Autoextinguish: 94V-0
Operating Temperature: -40º C to +85º C
Insertion/Extraction Life: 1000 Minimum Cycles
Contact Resistance: 10 Milli-Ohms maximum
Current/Voltage: 30 VAC/57 VDC at 1.5 Amps
Compliance: RoHS Compliant
PoE: Meets requirements of 15W PoE (IEEE 802.3af), 30W PoE+ (IEEE 802.3at), 60W PoE++ (IEEE 802.3bt Type 3) and 100W PoE++ (IEEE 802.3bt Type 4)
COMPLEMENTARY PRODUCTS TO “DO THE JOB RIGHT”
|
||
900005/900216 |
TERMINATION TOOL Professional Grade
Cable assemblies built using inadequate or poor quality tools and dies….. worn out tooling….. or mismatched tooling, WILL HAVE A MAJOR IMPACT ON THE PERFORMANCE OF THE CABLE ASSEMBLY. 111S08080054L34 Termination Instructions
|
|
3M™ 1181 |
PROPER CABLE PREPARATION INCLUDES COPPER SHIELDING TAPE TO MAINTAIN SHIELD INTEGRITY & PROVIDING A PLACE FOR THE “C CRIMP” SHIELD ON THE CABLE3M™ 1181 1/2″ Copper Foil Shielding Tapewith Conductive Adhesive |
|
SNAGLESS STRAIN RELIEF BOOT OPTIONSCLEAR PLASTIC SLIM-LINE SNAGLESS BOOT Boot “Locks” into Plug – 360º Honeycomb Design Provides Bend Radius Strain Relief – Clear Plastic eliminates color “mismatch” between cable and boot.
Accepts up to 6.7MM Jacket OD (.264″)
|
||
3M™ EPS-300 |
3M™ HEAT SHRINK TUBING 1/2 Inch Diameter |
Additional information
111S08080054L34 | 1-99 $1.65 USD, 100-999 $1.47 USD, 1000 $0.67 USD |
---|
The RJ-45 Is A Highly Engineered Interconnection System
CAVEAT EMPTOR.....Let The Buyer Beware
SUB-STANDARD, NON-COMPLIANT and COUNTERFEIT RJ45's coming in from the Far East
KNOW THE STANDARDS - KNOW THE SPECS - INSIST ON COMPLIANCE - KNOW YOUR SUPPLIERS
For more information, contact
[email protected]
RJ45s.com
2400 East Main Street
St. Charles, IL 60174
phone: (630) 659-6337
Reviews
There are no reviews yet.