Description

GenSPEED® 6 with 17 FREE® Category 6 CMR Cables

No Spline – .230″ OD

Includes part numbers 7133860-17F (Blue Spool), 7133861-17F (White Spool), 7133862-17F (Yellow Spool), 7133863-17F (Gray Spool), 7133864-17F (Red Spool), 7133865-17F (Orange Spool), 7133866-17F (Green Spool), 7133867-17F (Black Spool), 7133869-17F (Purple Spool).

7133840-17F (Blue Spool-Pac®), 7133841-17F (White, Spool-Pac®), 7133842-17F (Yellow Spool-Pac®), 7133843-17F (Gray Spool-Pac®), 7133844-17F (Red Spool-Pac®), 7133845-17F (Orange Spool-Pac®), 7133846-17F (Green Spool-Pac®), 7133847-17F (Black Spool-Pac®), 7133859-17F (Purple Spool-Pac®).

7133800-17F (Blue Pull-Pac® Il), 7133801-17F (White Pull-Pac® Il), 7133802-17F (Yellow Pull-Pac® Il), 7133803-17F (Gray Pull-Pac® Il), 7133804-17F (Red Pull-Pac® Il), 7133805-17F (Orange Pull-Pac® Il), 7133806-17F (Green Pull-Pac® Il), 7133807-17F (Black Pull-Pac® Il), 7133809-17F (Purple Pull-Pac® Il).

111-08080090L34 Product Features

* Incorporates a PATENTED CONDUCTIVE NEXT Reduction System. In addition to providing PRECISE CONDUCTOR ALIGNMENT, the Composite Carbon/Graphite Fiber Conductor Load Bar GREATLY REDUCES NEXT and RETURN LOSS by ABSORBING REFLECTIONS and CHANNELING IT AWAY FROM THE CONDUCTORS. Using recommended termination procedures and equipment, ANSI/TIA-568.2-D Category 6 performance levels are achievable with good workmanship and certified cables.
* Utilizes a 4 over 4 contact design (4 LONG and 4 SHORT) that provides increased isolation and spatial dispersion within the plug to minimize crosstalk and accepts .044″ – 048″ INSULATED CONDUCTOR OD.
* The conductors are isolated by the Conductor Load Bar and through Plastic Isolation/Insulation Barriers where contact termination is made, thereby improving electrical performance.
* Plug accepts both SOLID or STRANDED conductors
* Made in USA

111-08080090L34 Specifications

Performance: Meets or Exceeds ANSI/TIA 568.2-D – ANSI/TIA 1096 (Formerly FCC Part 68) – ANSI/TIA 968-A – CENELEC EN 50173 – IEC 60603 – ISO-8877 – ISO/IEC 11801
Contact Material: Phosphor Bronze – .012″ thick
Contact Plating: Minimum 50 Micro-Inch Pure Gold – Selective 24 Carat Hard Gold Plate in contact area over 100 Micro-Inch minimum Nickel Plate. Exceeds TIA-1096 specifications (formerly FCC Part 68)
Plug Material: Polycarbonate
Plug Tolerances and Dimensions: Meets TIA-1096 specifications (formerly FCC Part 68)
UL Recognized: UL File #E188111 – UL 1863 (1000v)
Flame Autoextinguish: 94V-0
Operating Temperature: -40º C to +85º C
Insertion/Extraction Life: 1000 Minimum Cycles
Contact Resistance: 10 Milli-Ohms maximum
Current/Voltage: 30 VAC/57 VDC at 1.5 Amps
Compliance: RoHS Compliant
PoE: Meets requirements of 15W PoE (IEEE 802.3af), 30W PoE+ (IEEE 802.3at), 60W PoE++ (IEEE 802.3bt Type 3) and 100W PoE++ (IEEE 802.3bt Type 4)

COMPLEMENTARY PRODUCTS TO “DO THE JOB RIGHT”

900005/900216

TERMINATION TOOL

Professional Grade
Controlled Ratchet Style
Insures Proper Blade Setting Depth
1,000,000 Cycles Minimum

DO NOT TAKE THIS STEP FOR GRANTED

Cable assemblies built using inadequate or poor quality tools and dies….. worn out tooling….. or mismatched tooling, WILL HAVE A MAJOR IMPACT ON THE PERFORMANCE OF THE CABLE ASSEMBLY

111-08080090L34 Termination Instructions
(Same as 111-08080054L34)

6MM Slim-Line Boot

6MM Boot

SNAGLESS STRAIN RELIEF BOOT OPTIONS

SLIM-LINE STRAIN RELIEF
SNAGLESS BOOTS

Color Options:
B0013 (Blue) – B0028 (Light Gray)
B0029 (Dark Gray) – B0030 (Yellow)
B0031 (Green) – B0032 (Black) – B0033 (Purple)
B0034 (White) – B0035 (Red) and B0040 (Orange)

RUBBER PULL OVER STRAIN RELIEF
SNAGLESS BOOTS

Color Options:
B001 (light Gray) – B002 (Dark Gray)
B003 (Blue) – B004 (Yellow) – B005 (Green)
B006 (Black) – B007 (Purple) -B008 (White)
B009 (Red) – B0010 (Orange) and B0011 (Pink)

6MM Boots