![Made In The USA RJ45s.com](https://rj45s.com/wp-content/uploads/2021/01/el4.jpg)
![Made In The USA RJ45s.com](https://rj45s.com/wp-content/uploads/2021/01/el4.jpg)
![Made In The USA RJ45s.com](https://rj45s.com/wp-content/uploads/2021/01/el4.jpg)
![sent RJ45s.com](https://rj45s.com/wp-content/uploads/2021/02/sent.jpg)
![sent RJ45s.com](https://rj45s.com/wp-content/uploads/2021/02/sent.jpg)
![Made In The USA RJ45s.com](https://rj45s.com/wp-content/uploads/2021/01/el4.jpg)
![Made In The USA RJ45s.com](https://rj45s.com/wp-content/uploads/2021/01/el4.jpg)
![Made In The USA RJ45s.com](https://rj45s.com/wp-content/uploads/2021/01/el4.jpg)
![7938A RJ45s.com](https://rj45s.com/wp-content/uploads/2021/03/7938A.png)
![7938A RJ45s.com](https://rj45s.com/wp-content/uploads/2021/03/7938A.png)
Description
BELDEN® 7938A DataTuff® 5e, 4 Bonded-Pr #24 Sol PO Ins, OS+TC Brd, TPE Jkt, TPE Jkt High Flex AWM 20606
No Spline
Inner Jacket .254″ OD
Outer Jacket .342″ OD
Industrial Ethernet Cat 5e, 4 Bonded-Pair, 24AWG (Solid) Alloy, PO Insulation, Overall Beldfoil®+Tinned Copper Braid (85%) Shield, TPE Inner Jacket, TPE Outer Jacket, High Flex AWM 20606
Includes Part Numbers: 7938A 0101000 (BLACK 1K REEL) and 7938A B591000 (BLACK MATTE 1K REEL)
* Shielded RJ45 plug with integral “C CRIMP” for increased shield effectiveness, added cable stress relief and additional strength. Accepts up to a .310″ cable jacket OD
* Incorporates a PATENTED CONDUCTIVE NEXT Reduction System. In addition to providing PRECISE CONDUCTOR ALIGNMENT, the Composite Carbon/Graphite Fiber Conductor Load Bar GREATLY REDUCES NEXT and RETURN LOSS by ABSORBING REFLECTIONS and CHANNELING IT AWAY FROM THE CONDUCTORS. Using recommended termination procedures and equipment, ANSI/TIA-568.2-D Category 6 performance levels are achievable with good workmanship and certified cables.
* Utilizes a 4 over 4 contact design (4 LONG and 4 SHORT) that provides increased isolation and spatial dispersion within the plug to minimize crosstalk and accepts .044″ – 048″ INSULATED CONDUCTOR OD.
* The conductors are isolated by the Conductor Load Bar and through Plastic Isolation/Insulation Barriers where contact termination is made, thereby improving electrical performance.
* Plug accepts both SOLID or STRANDED conductors
* Made in USA
111S08080090H34 Specifications
Performance: Meets or Exceeds ANSI/TIA 568.2-D – ANSI/TIA 1096 (Formerly FCC Part 68) – ANSI/TIA 968-A – CENELEC EN 50173 – IEC 60603 – ISO-8877 – ISO/IEC 11801
Contact Material: Phosphor Bronze – .012″ thick
Contact Plating: Minimum 50 Micro-Inch Pure Gold – Selective 24 Carat Hard Gold Plate in contact area over 100 Micro-Inch minimum Nickel Plate. Exceeds TIA-1096 specifications (formerly FCC Part 68)
Plug Material: Polycarbonate
Plug Tolerances and Dimensions: Meets TIA-1096 specifications (formerly FCC Part 68)
UL Recognized: UL File #E188111 – UL 1863 (1000v)
Flame Autoextinguish: 94V-0
Operating Temperature: -40º C to +85º C
Insertion/Extraction Life: 1000 Minimum Cycles
Contact Resistance: 10 Milli-Ohms maximum
Current/Voltage: 30 VAC/57 VDC at 1.5 Amps
Compliance: RoHS Compliant
PoE: Meets requirements of 15W PoE (IEEE 802.3af), 30W PoE+ (IEEE 802.3at), 60W PoE++ (IEEE 802.3bt Type 3) and 100W PoE++ (IEEE 802.3bt Type 4)
COMPLEMENTARY PRODUCTS TO “DO THE JOB RIGHT”
|
||
![]() 900020 |
TERMINATION TOOL Professional Grade
Cable assemblies built using inadequate or poor quality tools and dies….. worn out tooling….. or mismatched tooling, WILL HAVE A MAJOR IMPACT ON THE PERFORMANCE OF THE CABLE ASSEMBLY. 111S08080090H34 Termination Instructions
|
|
![]()
|
PROPER CABLE PREPARATION INCLUDES COPPER SHIELDING TAPE TO MAINTAIN SHIELD INTEGRITY & PROVIDING A PLACE FOR THE “C CRIMP” SHIELD ON THE CABLE
3M™ 1181 |
|
![]() |
3M™ HEAT SHRINK TUBING 1/2 Inch Diameter |
|
Additional information
Option | 1-99, 100-999, 1000 |
---|
The RJ-45 Is A Highly Engineered Interconnection System
CAVEAT EMPTOR.....Let The Buyer Beware
SUB-STANDARD, NON-COMPLIANT and COUNTERFEIT RJ45's coming in from the Far East
KNOW THE STANDARDS - KNOW THE SPECS - INSIST ON COMPLIANCE - KNOW YOUR SUPPLIERS
For more information, contact
[email protected]
RJ45s.com
2400 East Main Street
St. Charles, IL 60174
phone: (630) 659-6337