111-08080054L34

Description

LANmark-6 Category 6 Riser Cables

No Spline – .205″ OD

Includes part numbers 10136339 (Blue Box), 10136340 (White Box), 10136342 (Blue Reel), 10136343 (White Reel), 10136752 (Green Box), 10136753 (Yellow Box), 10136774 (Green Reel), 10136775 (Yellow Reel), 10170931 (Red Box), 10170932 (Black Box), 10189773 (Orange Box), 10190136 (Red Reel), 11055358 (Orange Reel), 11058425 (Pink Box), 11072302 (Violet Box), 11074703 (Blue smartPAK Box), 11074744 (White smartPAK Box, 11074906 (Yellow smartPAK Box), 11074907 (Green smartPAK Box), 11074908 (Red smartPAK Box), 11074909 (Black smartPak Box), 11074910 (Violet. smartPAK Box), 11074911 (Orange smartPAK Box), 11078894 (Violet Reel), 11091257 (Dark Grey Box), 11091285 (Dark Grey Reel) and 11094953 (Dark Grey smartPAK Box)

111-08080054L34 Product Features

* Incorporates a PATENTED CONDUCTIVE NEXT Reduction System. In addition to providing PRECISE CONDUCTOR ALIGNMENT, the Composite Carbon/Graphite Fiber Conductor Load Bar GREATLY REDUCES NEXT and RETURN LOSS by ABSORBING REFLECTIONS and CHANNELING IT AWAY FROM THE CONDUCTORS. Using recommended termination procedures and equipment, ANSI/TIA-568.2-D Category 6 performance levels are achievable with good workmanship and certified cables.
* Utilizes a 4 over 4 contact design (4 LONG and 4 SHORT) that provides increased isolation and spatial dispersion within the plug to minimize crosstalk and allow for up to a .042″ MAXIMUM INSUALTED CONDUCTOR OD.
* The conductors are isolated by the Conductor Load Bar and through Plastic Isolation/Insulation Barriers where contact termination is made, thereby improving electrical performance.
* Plug accepts both SOLID or STRANDED conductors
* Made in USA

111-08080054L34 Specifications

Performance: Meets or Exceeds ANSI/TIA 568.2-D – ANSI/TIA 1096 (Formerly FCC Part 68) – ANSI/TIA 968-A – CENELEC EN 50173 – IEC 60603 – ISO-8877 – ISO/IEC 11801
Contact Material: Phosphor Bronze – .012″ thick
Contact Plating: Minimum 50 Micro-Inch Pure Gold – Selective 24 Carat Hard Gold Plate in contact area over 100 Micro-Inch minimum Nickel Plate. Exceeds TIA-1096 specifications (formerly FCC Part 68)
Plug Material: Polycarbonate
Plug Tolerances and Dimensions: Meets TIA-1096 specifications (formerly FCC Part 68)
UL Recognized: UL File #E188111 – UL 1863 (1000v)
Flame Autoextinguish: 94V-0
Operating Temperature: -40º C to +85º C
Insertion/Extraction Life: 1000 Minimum Cycles
Contact Resistance: 10 Milli-Ohms maximum
Current/Voltage: 30 VAC/57 VDC at 1.5 Amps
Compliance: RoHS Compliant
PoE: Meets requirements of 15W PoE (IEEE 802.3af), 30W PoE+ (IEEE 802.3at), 60W PoE++ (IEEE 802.3bt Type 3) and 100W PoE++ (IEEE 802.3bt Type 4)

COMPLEMENTARY PRODUCTS TO “DO THE JOB RIGHT”
900005 (with factory installed die set 900216)	TERMINATION TOOL Professional Grade – Controlled Ratchet Style Insures Proper Blade Setting Depth 1,000,000 Cycles Minimum DO NOT TAKE THIS STEP FOR GRANTED Cable assemblies built using inadequate or poor quality tools and dies….. worn out tooling….. or mismatched tooling, WILL HAVE A MAJOR IMPACT ON THE PERFORMANCE OF THE CABLE ASSEMBLY. 111-08080054L34 Termination Instructions	900005/900216 Price Per Unit $435.00 USD
6MM Slim-Line Boot  6MM Boot	SNAGLESS STRAIN RELIEF BOOTS SLIM-LINE BOOTS Slim-Line Boots fit inside the Plug Locking it in place. It is the same width of the plug making it ideal for High Density Applications. For Jacket OD’s of up to 6MM (.240″) Color Options: B0013 (Blue) – B0028 (Light Gray) B0029 (Dark Gray) – B0030 (Yellow) B0031 (Green) – B0032 (Black) – B0033 (Purple) B0034 (White) – B0035 (Red) and B0040 (Orange)   STANDARD PULL OVER BOOTS Standard Pull Over Boots fit “over” the outside of the plug body. For Jacket OD’s of up to 6MM (.240″) Color Options: B001 (light Gray) – B002 (Dark Gray) B003 (Blue) – B004 (Yellow) – B005 (Green) B006 (Black) – B007 (Purple) -B008 (White) B009 (Red) – B0010 (Orange) and B0011 (Pink)	6MM BOOTS
EPS-300	3M™ HEAT SHRINK TUBING 1/2 Inch Diameter Adhesive-Lined, 3:1, Flexible, Polyolefin “Lock” Everything in Place Sold in 1 1/2 Inch Lengths	3M EPS-300 Heat Shrink Price Per Piece $0.43 USD