Name: 111S08080054H34
SKU: 2547
Availability: InStock

Description

SYSTIMAX® 360™ GigaSPEED X10D® U/UTP 1091B Category 6A Non-Plenum Cables

With Spline – .295″ OD

760105742 Black 1000 ft Reel – 760107086 Black 1000 ft WE TOTE® Box

760105759 Blue 1000 ft Reel – 760105833 Blue 3000 ft Reel

760107094 Blue 1000 ft WE TOTE® Box

760105775 Green 1000 ft Reel – 760107110 Green 1000 ft WE TOTE® Box

760105767 Light Blue 1000 ft Reel – 760138602 Light Blue 3000 ft Reel – 760107102 Light Blue 1000 ft WE TOTE® Box

760105783 Orange 1000 ft Reel – 760107128 Orange 1000 ft WE TOTE® Box

760188276 Pink 1000 ft WE TOTE® Box

760105791 Red 1000 ft Reel – 760159426 Red 3000 ft Reel – 760107136 Red 1000 ft WE TOTE® Box

760105114 Slate 1000 ft Reel – 760105858 Slate 3000 ft Reel

760107078 Slate 1000 ft WE TOTE® Box

760105817 White 1000 ft Reel – 760105841 White 3000 ft Reel – 760107144 White 1000 ft WE TOTE® Box

760105825 Yellow 1000 ft Reel – 760163337 Yellow 3000 ft Reel – 760107151 Yellow 1000 ft WE TOTE® Box

111S08080054H34 Product Features

* Shielded RJ45 plug with integral “C CRIMP” for increased shield effectiveness, added cable stress relief and additional strength
* Incorporates a PATENTED CONDUCTIVE NEXT Reduction System. In addition to providing PRECISE CONDUCTOR ALIGNMENT, the Composite Carbon/Graphite Fiber Conductor Load Bar GREATLY REDUCES NEXT and RETURN LOSS by ABSORBING REFLECTIONS and CHANNELING IT AWAY FROM THE CONDUCTORS. Using recommended termination procedures and equipment, ANSI/TIA 568.2-D Category 6 performance levels are achievable with good workmanship and certified cables.
* Utilizes a 4 over 4 contact design (4 LONG and 4 SHORT) that provides increased isolation and spatial dispersion within the plug to minimize crosstalk and accepts .037″ – 042″ INSULATED CONDUCTOR OD and .310″ Jacket OD.
* The conductors are isolated by the Conductor Load Bar and through Plastic Isolation/Insulation Barriers where contact termination is made, thereby improving electrical performance.
* Plug accepts both SOLID or STRANDED conductors
* Made in USA

111S08080054H34 Specifications

Performance: Meets or Exceeds ANSI/TIA 568.2-D – ANSI/TIA 1096 (Formerly FCC Part 68) – ANSI/TIA 968-A – CENELEC EN 50173 – IEC 60603 – ISO-8877 – ISO/IEC 11801
Contact Material: Phosphor Bronze – .012″ thick
Contact Plating: Minimum 50 Micro-Inch Pure Gold – Selective 24 Carat Hard Gold Plate in contact area over 100 Micro-Inch minimum Nickel Plate. Exceeds TIA-1096 specifications (formerly FCC Part 68)
Plug Material: Polycarbonate
Plug Tolerances and Dimensions: Meets TIA-1096 specifications (formerly FCC Part 68)
UL Recognized: UL File #E188111 – UL 1863 (1000v)
Flame Autoextinguish: 94V-0
Operating Temperature: -40º C to +85º C
Insertion/Extraction Life: 1000 Minimum Cycles
Contact Resistance: 10 Milli-Ohms maximum
Current/Voltage: 30 VAC/57 VDC at 1.5 Amps
Compliance: RoHS Compliant
PoE: Meets requirements of 15W PoE (IEEE 802.3af), 30W PoE+ (IEEE 802.3at), 60W PoE++ (IEEE 802.3bt Type 3) and 100W PoE++ (IEEE 802.3bt Type 4)

COMPLEMENTARY PRODUCTS TO “DO THE JOB RIGHT”

900020

Terminates Both
Contacts and “C” Crimp

TERMINATION TOOL

Professional Grade
Controlled Ratchet Style
Insures Proper Blade Setting Depth
1,000,000 Cycles Minimum

DO NOT TAKE THIS STEP FOR GRANTED

Cable assemblies built using inadequate or poor quality tools and dies…..worn out tooling…..or mismatched tooling,
WILL HAVE A MAJOR IMPACT ON THE PERFORMANCE OF THE CABLE ASSEMBLY.

111S08080054H34 Termination Instructions

8MM Boots

SNAGLESS STRAIN RELIEF BOOT OPTIONS

8MM SNAGLESS BOOT
Accepts up to 8MM Jacket OD (.314″)

Care must be taken to fully wrap the C CRIMP around the Cable (360º) to insure proper fit.

Color Options:
B0041 (Gray) – B0042 (Blue) – B0043 (White)
B0044 (Yellow) – B0046 (Red) – B0047 (Orange)
B0048 (Purple) – B0049 (Green) – B0051 (Black) – B0052 (Clear)

8MM Boots