111S080800F3LA4
Category 6a and 6 Shielded RJ45 Plug for STRANDED Insulated Conductors – .031″-.033″
With DUAL PATENTED Conductive NEXT Reduction System
Click in Box for PayPal Drop Down Menu
1-99 – $1.99
100-999 – $1.84
1000 – $0.79
Don’t Use PayPal….email order
NOTE: MUST use B00067L (shown below) to insure proper termination
Description
111S080800F3LA4 Product Features
For STRANDED Insulated Conductor OD’s of .031″-.033″
* Incorporates a DUAL PATENTED CONDUCTIVE NEXT Reduction System. In addition to providing PRECISE CONDUCTOR ALIGNMENT, the Composite Carbon/Graphite Fiber Conductor Load Bar GREATLY REDUCES NEXT and RETURN LOSS by ABSORBING REFLECTIONS and CHANNELING IT AWAY FROM THE CONDUCTORS. Using recommended termination procedures and equipment, ANSI/TIA 568.2-D Category 6a performance levels are achievable with good workmanship and certified cables.
* Utilizes standard 8 across contact design that provides increased isolation and spatial dispersion within the plug to minimize crosstalk and allow for up to a .031″ to .033″ MAXIMUM INSULATED CONDUCTOR OD.
* Plug accepts ONLY STRANDED conductors
* Made in USA
111S080800F3LA4 Specifications
Performance: Meets or Exceeds ANSI/TIA 568.2-D – ANSI/TIA 1096 (Formerly FCC Part 68) – ANSI/TIA 968-A – CENELEC EN 50173 – IEC 60603 – ISO-8877 – ISO/IEC 11801
Contact Material: Phosphor Bronze – .012″ thick
Contact Plating: Minimum 50 Micro-Inch Pure Gold – Selective 24 Carat Hard Gold Plate in contact area over 100 Micro-Inch minimum Nickel Plate. Exceeds TIA-1096 specifications (formerly FCC Part 68)
Plug Material: Polycarbonate
Plug Tolerances and Dimensions: Meets TIA-1096 specifications (formerly FCC Part 68)
UL Recognized:UL File #E188111 – UL 1863 (1000v)
Flame Autoextinguish: 94V-0
Operating Temperature: -40º C to +85º C
Insertion/Extraction Life: 1000 Minimum Cycles
Contact Resistance: 10 Milli-Ohms maximum
Current/Voltage: 30 VAC/57 VDC at 1.5 Amps
Compliance: RoHS Compliant
PoE: Meets requirements of 15W PoE (IEEE 802.3af), 30W PoE+ (IEEE 802.3at), 60W PoE++ (IEEE 802.3bt Type 3) and 100W PoE++ (IEEE 802.3bt Type 4)
COMPLEMENTARY PRODUCTS TO “DO THE JOB RIGHT”
|
||
900005/900216 |
TERMINATION TOOLProfessional Grade Controlled Ratchet Style Insures Proper Blade Setting Depth 1,000,000 Cycles MinimumDO NOT TAKE THIS STEP FOR GRANTEDCable assemblies built using inadequate or poor quality tools and dies….. worn out tooling….. or mismatched tooling, WILL HAVE A MAJOR IMPACT ON THE PERFORMANCE OF THE CABLE ASSEMBLY.111-08080095LA4 Termination Instructions |
|
|
SNAGLESS STRAIN RELIEF BOOT OPTIONS CLEAR PLASTIC SLIM-LINE SNAGLESS BOOT Boot “Locks” into Plug – 360º Honeycomb Design Provides Bend Radius Strain Relief – Clear Plastic eliminates color “mismatch” between cable and boot. Accepts up to 6.7MM Jacket OD (.264″)
|
|
3M™ EPS-300 |
3M™ HEAT SHRINK TUBING 1/2 Inch Diameter |
|
Additional information
111S08080016C34 | 1-99 $1.67 USD, 100-999 $1.41 USD, 1000 $0.67 USD |
---|
The RJ-45 Is A Highly Engineered Interconnection System
CAVEAT EMPTOR.....Let The Buyer Beware
SUB-STANDARD, NON-COMPLIANT and COUNTERFEIT RJ45's coming in from the Far East
KNOW THE STANDARDS - KNOW THE SPECS - INSIST ON COMPLIANCE - KNOW YOUR SUPPLIERS
For more information, contact
[email protected]
RJ45s.com
2400 East Main Street
St. Charles, IL 60174
phone: (630) 659-6337
Reviews
There are no reviews yet.